Instructions / Assembly

22 [e-mail]
A: On each side of one (440) Rafter place one (438) Rafter Corner Left and one (439) Rafter Corner Right so
the tops and edges are ush then attach with two #8 x 2-1/4” Wood Screws per side. (Fig. 8.1 and 8.2)
B: Place Fascia Beam Assembly from Step 7A on the bottom of (438) Rafter Corner Left, (439) Rafter Corner
Right and (440) Rafter so the sides are ush then attach with two #8 x 2-1/4” Wood Screws at each end and two
in the middle. (g. 8.1, 8.3 and 8.4)
C: Repeat Steps A and B to make a second Small Roof Rafter Assembly.
Hardware
Wood Parts
#8 x 2-1/4”
Wood Screws
(x 6 per
Fascia Beam
Assembly)
(440)
Rafter
Fascia Beam
Assembly
Step 8: Small Roof Rafter Assembly
Part 1
Fig. 8.1
20 x #8 x 2-1/4” Wood Screw
Fig. 8.3
Fig. 8.4
Note notches
facing up
Flush
Fascia Beam
Assembly
Fascia Beam
Assembly
Flush
(440)
Rafter
#8 x 2-1/4”
Wood Screws
#8 x 2-1/4”
Wood Screws
Flush
Fig. 8.2
(438) Rafter
Corner Left
(438) Rafter
Corner Left
(439) Rafter
Corner Right
(439) Rafter
Corner Right
Note angle
side up
(440)
Rafter
(439) Rafter
Corner Right
#8 x 2-1/4”
Wood Screws
2 x (440) Rafter
2 x (438) Rafter Corner Left
2 x (439) Rafter Corner Right