Installation Guide

 10 [e-mail]
A:AtoneendofeachRollerChannelAssemblyattachone3/16”x1-1/4”EyeBolt(with3/16”standardnut,2
3/16”atwashersand3/16”locknut)asshowning.4.1and4.2.Makesuretheeyeboltdoesnotprotrude
throughthelocknutandtheeyeboltfacesthedirectionshowning.4.2.ThiswillbetheBackorFixedSideof
theassembly.
Step 4: Attach Eye Bolts
Fig. 4.1
Fig. 4.2
3/16”x1-1/4”
EyeBolt
Watch for protrusions
3/16”StandardNut
Note orientation of eyebolt
Hardware
2 x 3/16 x 1-1/4” Eye Bolt
(3/16” standard nut, 3/16” at washer x 2, 3/16” lock nut)
3/16”FlatWasher
3/16”LockNut
Roller
Channel
Assembly
Back or
Fixed Side
Front Side