Installation Guide

 8 [e-mail]
Step 2: Roller Channel Assembly
A:InsertoneRollerChanneloneachsideofoneRollerChannelConnectorandattachwithtwo1/4x3/4”
PanBolts(withtwoatwashersandonelocknut).Makesureboltsarefullytightenedandtheyareinserted
asshownbelow.NoticesmallerholesatendsofRollerChannel.(g.2.1,2.2and2.3)
B:RepeatforasecondRollerChannelAssembly.(g.2.1,2.2and2.3)
Fig. 2.3
Fig. 2.1
Hardware
4 x 1/4 x 3/4” Pan Bolt
(1/4” at washer x 2, 1/4” lock nut)
Other Parts
2 x Roller Channel Connector
4 x Roller Channel
1/4”Flat
Washer
1/4”LockNut
1/4”x3/4”
PanBolt
Roller
Channel
Roller
Channel
Connector
Roller
Channel
Fig. 2.2
Roller
Channel
Notice smaller
holes at ends