Assembly Manual

13
Move to the opposite side.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top corner is ush
to the oor frame (Fig. B).
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your oor frame is square by installing one panel and squaring frame.
PARTS REQUIRED:
x1
x219
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
2" (5,1 cm)
Grid lines up
FLOOR PANELS
Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48" edge and corner
ush to the oor frame (Fig A). Secure panel with two 2" nails in the corners.
Flush
Flush
6"
(15,2 cm)
12"
(30,5 cm)
Flush
(2) Nails
3/4"
(1,9 cm)
Fig. A
Flush
(2) Nails
3/4"
(1,9 cm)
Fig. B
2" (5,1 cm)
Nails