Assembly Manual

PARTS REQUIRED:
x2
2 x 4 x 89" (5 x 10,2 x 226,1 cm)
SZ
x1
2 x 4 x 80" (5 x 10,2 x 203,2 cm)
TK
x4
3" (7,6 cm)
36
GABLE END WALL
TK
TK
SZ
SZ
HI NT:
For easier nailing
stand on frame.
BEGIN
1
3-1/2"
(8,9 cm)
1-1/2"
(3,8 cm)
1-1/2"
(3,8 cm)
44-1/2"
(113 cm)
44-1/2"
(113 cm)
Fig. A
89"
(76,2 cm)
44-1/2"
(113 cm)
44-1/2"
(113 cm)
3" (7,6 cm)
Two Nails at each end.
Temporary support
x2
19/32 x 5-1/2 x 30-1/8"
(1,5 x 14 x 76,5 cm)
DHA
Temporary support
x2
2 x 4 x 6"
(5,1 x 10,2 x 15,2 cm)
PVA
Orient parts on oor. TK is on at side (Fig.A).
Support center stud TK with temporary supports DHA and PVA as shown.
Measure, mark and square.
Use two 3" nails at each connection.
PVA
DHA
Temporary Support - stack one
PVA (2 x 4") and one
DHA (5-1/2 x 30-1/8").