Assembly Manual

41
PARTS REQUIRED:
3" (7,6 cm)
x1
BACK WALL
2" (5,1 cm)
x2
x14
1-1/2" (3,8 cm)
Fig. A
Flush
STEP 3 FIRST
SCREW
BEGIN
Stand back wall on oor.
Center back wall on the 168" (426,7 cm) oor dimension.
Secure top of wall using one 2" screw into top plate (Fig A).
1
Nail gable wall panel to back wall stud
using 1-1/2" nails 6" apart (Fig. B).
ENSURE GABLE AND BACK WALL PANELS
ARE FLUSH BEFORE SECURING.
6" (15,2 cm)
Fig. B
1-1/2"
(3,8 cm)
Nails
Fig. C
3" (7,6 cm)
Screw
3" (7,6 cm)
Screw
BE SURE TOP OF WALL FRAMES ARE FLUSH.
2"
(7,6 cm)
Screw
2" (5,1 cm)
Screw
2
Move to the bottom of gable end wall and
secure bottom of wall using one 2" screw
into back wall bottom plate (Fig A).
Flush
Secure gable wall top frame 2 x 4 using one 3" screw
toe-screwed into back wall frame at an angle
as shown (Fig. C).
STEP 4 SECOND
SCREW
168"
(426,7 cm)