Assembly Manual

44
GABLE DOOR WALL
PARTS REQUIRED:
6"
(15,2 cm)
6"
(15,2 cm)
6"
(15,2 cm)
Fig. C
You have  nished standing your gable door wall.
Nail gable wall panels to front and back wall
studs using 1-1/2" nails 6" apart (Fig. E).
Secure gable wall to  oor using 3" nails
(Fig. E).
2"
(5,1 cm)
Nails
Angle nail
to hit  oor
frame.
Fig. F
FINISH
4
3
5
6
3" (7,6 cm)
Screw
1-1/2"
(3,8 cm)
Nails
Fig. E
Secure gable door wall top frame 2 x 4 using
3" screws toe-screwed at each corner into top
wall frames at an angle as shown in (Fig. F).
3" (7,6 cm)
Nails
Nail lower edge of panels to  oor using 2" nails 6" apart. Angle nail to hit  oor frame (Fig. C).
Remove temporary support.