Assembly Manual

Secure the roof panels using 2" nails 6" apart on edges and 12" apart inside panel.

PARTS REQUIRED:

ROOF PANELS

(15,2 cm)

12"

(30,5 cm)

Attach a 15-7/8" x 23-7/8" panel with the rough side up (painted-grid lines side),

ush with the installed 15-7/8" x 96" panel (Fig A).

The panel is ush at the gable end overhang (Fig. B),

and the panel is 1/2" from outside of the end rafter (Fig. C).

Secure panel with two 2" (5,1 cm) nails in the corners.

Flush

at rafter ends.

Fig. B

15-7/8" x 23-7/8"

Flush

Fig. A

Two Nails

Fig. C

1/2"

(1,3 cm)