Assembly Manual

60
PARTS REQUIRED:
EAVE SIDE SOFFITS
Ensure soft boards are ush at rafter ends (Fig. B) and ush at seam.
x36
2" (5,1 cm)
1
BEGIN
x2
3/8 x 4-7/8 x 73-1/2" (1 x 12,4 x 186,7 cm)
x2
3/8 x 4-7/8 x 96" (1 x 12,4 x 243,8 cm)
Flush
x2
2 x 4 x 22-1/2" (5,1 x 10,2 x 57,1 cm)
AO
Place eave nailer AO between two center rafters as shown.
Keep AO ush to the outside edge of rafter (Fig. A, Fig. B).
Pre-drill a 1/8" hole through center rafters into AO to avoid splitting rafter. Secure with 3" screws (Fig. A).
AO
AO
Fig. A
PRE-DRILL
Flush
Flush
(2) 3" (7,6 cm) Screws
(2) 3" (7,6 cm) Screws
3" (7,6 cm)
x4