Assembly Manual

62
EAVE SIDE FASCIA
x36
2" (5,1 cm)
Repeat Steps 1 - 2 to attach eave nailer and sof t boards on the opposite side.
1
BEGIN
3
2
You have  nished installing your eave side fascia.
FINISH
PARTS REQUIRED:
Primed Side Out
2" (5,1 cm) Finish Nails
Flush with
roof panel
Fig.A
Flush
x2
3/8 x 4-3/4 x 77-1/4" (1 x 12,1 x 196,2 cm)
x2
3/8 x 4-3/4 x 96" (1 x 12,1 x 243,8 cm)
Place 77-1/4" sof t board primed side down,  ush to gable trim unit and roof sheathing (Fig A).
Secure using 2"  nish nails, two in each rafter and two into face of AO as shown.
Place 96" sof t board primed side down,
 ush to gable trim unit and roof sheathing (Fig A). Secure
using 2"  nish nails, two in each rafter and two into face of AO as shown.
4-3/4" x 77-1/4"
4-3/4" x 96"