Assembly Manual

64
4
PARTS REQUIRED:
DOUBLE DOORS - GABLE WALL
OO
Flush
against wall panels.
Fig. A
OO
Center doors on panel seam as shown (Fig. B).
Remove temporary supports and check doors open properly.
FINISH
You have  nished installing your double doors.
Screw hinge boards into wall supports and  oor using ten 3" screws as shown.
Make sure screws go into framing and  oor (Fig. C, D).
5
3" (7,6 cm)
Screws into the wall
support and  oor frame.
Fig. B
SEAM
Fig. C
3/8"
(1 cm)
Fig. D
Angle 3" (7,6 cm)
Screw
Attach temporary support OO as a ledger board  ush under wall
panels for doors to rest on, using two 3" screws
(Fig. A).
3" (7,6 cm)
x12
OO
x1
1-1/4 x 2-1/2 x 69" (3,2 x 6,3 x 175,3 cm)