Assembly Manual

69
PARTS REQUIRED:
SINGLE DOOR - FRONT WALL
Refer to Page 20 for right hand swing single door note.
3" (7,6 cm)
x5
Center door in wall panel opening.
Hold door in position and keep level.
Install single door with black-painted hinge board.
FINISH
You have  nished installing your single door.
2
3" (7,6 cm)
Screws
into the wall support
and  oor frame.
3
Screw hinge board into wall supports and  oor using  ve 3" screws as shown.
Make sure screws go into framing and  oor (Fig. D, Fig. E).
Measure Gap (Fig. B) between door trim and wall panel as shown.
Hold door in position and keep level.
Hinge-board must overhang wall panel at measurement shown (Fig. C).
Bottom of door trim is even with wall panel as shown.
5/8"
(1,0 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
5/8"
(1,6 cm)
BEGIN
1
x1
Painted
Black
on Ends
UNIVERSAL DOOR
Left
Angle 3" (7,6 cm)
Screw
Fig. E
Fig. D
Fig. B
3/8"
(1,0 cm)
Fig. C
3/8"
(1,0 cm)
Door trim even
with panel.