Assembly Manual

Set gable end wall on oor and secure top of wall
using one 2" screw into top plate (FigA).
1
40
GABLE END WALL INSTALLATION
3" (7,6 cm)
2" (5,1 cm)
x22
2" (5,1 cm)
x2
x1
x14
1-1/2" (3,8 cm)
PARTSREQUIRED:
3" (7,6 cm)
x10
It is important to secure the gable end wall
in the following order:
ENSURETOPOFWALLFRAMESAREFLUSH.
3
2
Nail lower edge of panels to oor using 2" nails 6" apart.
Angle nail to hit oor frame (Fig.B).
ENSUREGABLEANDBACKWALLPANELS
AREFLUSHBEFORESECURING.
You have nished standing your gable end wall
FINISH
8
Secure gable wall to oor using 3" nails (Fig.C).
Remove temporary support OO.
Nail gable wall panel to back wall stud
using 1-1/2" nails 6" apart (Fig.C).
4
5
7
6
6"
(15,2 cm)
Flush
Fig.A
Fig.B
2"(5,1cm)
Nail
Angle nail to hit
oorframe.
Secure gable wall top frame 2 x 4 using one 3" screw
toe-screwed into eave wall frame at an angle as
shown (Fig.D).
6"
(15,2 cm)
3"(7,6cm)
Nails
1-1/2"
(3,8cm)
Nails
Fig.D
3"(7,6cm)
Screw
BEGIN
Stand gable end wall on oor.
2"(3,8cm)
Screw
2"
(5,1cm)
Screw
Fig.C
Move to the bottom of gable end wall and
secure bottom of wall using one 2" screw into
eave wall bottom plate (FigA).
Flush
STEP 1 FIRST
SCREW
2"(5,1cm)
Nails
STEP 3
STEP 2 SECOND
SCREW
2"
(5,1cm)
Screw
Flush