Assembly Manual

44
GABLE END WALL INSTALLATION
PARTSREQUIRED:
6"
(15,2 cm)
6"
(15,2 cm)
6"
(15,2 cm)
Fig.C
You have nished standing your second gable end wall.
Secure gable wall to oor using 3" nails (Fig.E).
Nail gable wall panels to front and back wall
studs using 1-1/2" nails 6" apart (Fig.E).
2"
(5,1cm)
Nails
Angle nail
tohitoor
frame.
FINISH
7
4
3
5
6
1-1/2"
(3,8cm)
Nails
Fig.F
3"(7,6cm)
Screw
Fig.E
Secure gable wall top frame 2 x 4 using 3" screws
toe-screwed at each corner into top wall frames at
an angle as shown in (Fig.F).
3"(7,6cm)
Nails
Nail lower edge of panels to oor using 2" nails 6" apart. Angle nail to hit oor frame (Fig.C).