Assembly Manual

46
GABLE LADDERS
PARTSREQUIRED:
Fig.C
75-1/4"
(191,1 cm)
3-1/2"
(8,9 cm)
47-1/4"
(120 cm)
23-1/4"
(59,1 cm)
3"
(7,6cm)
Screws
3"
(7,6cm)
Screws
ECA
ECA
CLAx4
Arrange, measure and mark locations of four CLA as shown place ECA
on top. Secure using 3" screws as shown (Fig.A). Ensure parts are
ush along edges.
2
3
4
6
5
1
BEGIN
Orient parts as shown (Fig.A).
You will build FOUR assemblies (Fig.B).
x8
2 x 3 x 75-1/4" (5,1 x 7,6 x 191,1 cm)
ECA
x16
2 x 4 x 4-7/8" (5,1 x 10,2 x 12,4 cm)
CLA
3" (7,6 cm)
x72
Fig.B
x4
Fig.A
Flush
Flush
Flush
Flush
Flush
3"
(7,6cm)
Screws
Flip over gable ladder sub-assembly and attach ECA to four CLA using 3" screws (Fig.C).
Repeat STEPS 2-3 to build three additional gable ladder sub-assemblies.
Repeat STEP 5 to build the other gable ladder.
To complete gable ladder, toe-screw two sub-assemblies together using
3" screws (Fig.D).
Fig.D