Assembly Manual

49
PARTSREQUIRED:
TRUSSES
3" (7,6 cm)
x24
FINISH
6
Repeat Steps 1-4 to install trusses at opposite side.
Secure rafter to top plate with one 3" screw from under top plate (Fig.B,C).
Continue securing rafter to top plate with two 3" screws above notch (Fig.B,C).
x2
Pre-assembled
trusswith2
gussets
x2
Pre-assembled
truss with 1
gusset
You have nished attaching your trusses.
4
5
BEGIN
¸
1
Rest rst truss with 2 gussets on top plate, aligned over back wall stud and front wall window crippler at
24-3/8"measurement from inside of gable panel. Ensure rafter notch is tight to side wall (Fig.A,FigB).
Rest second truss with 1 gusset on top plate, aligned over stud and at 36-3/8"measurement from inside of
gable panel. Ensure rafter notch is tight to gable wall (Fig.B,FigC). Secure rafters with 3" screws (Fig.A,Fig.B).
12"
(30,5 cm)
12"
(30,5 cm)
24-3/8"
(61,9) cm)
24-3/8"
(61,9) cm)
36-3/8"
(92,4) cm)
36-3/8"
(92,4) cm)
MEASUREMENT
ISTOINSIDE
OFRAFTER
MEASURE
FROMINSIDE
OFPANEL
MEASURE
FROMINSIDE
OFPANEL
MEASUREMENT
ISTOINSIDE
OFRAFTER
2
3
BEGIN
HERE
BEGIN
HERE
Fig.C
Tight to side wall
(3)3"(7,6cm)
Screws
Toe-screwfrominside.
Fig.A
Toe-screwfrominside.
Fig.B
(3)3"(7,6cm)
Screws
Tight to side wall
Alignoverstuds.
Truss with 1
gusset facing out
Truss with 1
gusset facing out