Assembly Manual
54
PARTSREQUIRED:
DORMER
FINISH
17
You have nished pre-assembling your dormer. Proceed to install roof panels.
Place pre-assembled overhang unit between truss ends as shown. Ensure overhang unit is ush
with ends.
Secure with 3" screws.
●HI NT: Use a "C" clamp at each side to hold frame ush and square with trusses during installation.
16
x1
3" (7,6 cm)
x4
Pre-assembled overhang frame
Pre-assembled
overhang unit
3"(7,6cm)
Screws
Flush
Flush