Assembly Manual

32-5/8x48"

Nail the roof panel using 2" nails 6" apart

on edges and 12" apart inside panel.

PARTSREQUIRED:

ROOF PANELS

(15,2 cm)

12"

(30,5 cm)

12"

(30,5 cm)

27-1/4"x48"

Place the 27-1/4"x48"roof panel as shown with the rough side up. Use a gauge block to ensure the panel

measures 3/4" (1,9 cm) along the length of the rafter(Fig.C) Panel should be ush with end of rafter (Fig.B)

and ush along edge of installed panel.

Secure with 2" nails 6" apart on edge and 12" apart inside panel.

Place the 32-5/8"x48"roof panel as shown with the rough side up. Use a gauge block to ensure the panel

measures 3/4" (1,9 cm) along the length of the rafter(Fig.C) Panel should be ush with end of rafter (Fig.B)and

ush along edge of installed panel. Move and adjust gable unit and truss to make ush with 32-5/8"x48"roof

panel.

Secure with 2" nails 6" apart on edge and 12" apart inside panel.

Place another 27-1/4"x48"roof panel as shown with

the rough side up. Use a gauge block to ensure the

panel measures 3/4" (1,9 cm) along the length of the

rafter. Panel should be ush with end of rafter (Fig.B)

and ush along edge of installed panel.

Secure with 2" nails 6" apart on edge and 12" apart

inside panel.

Flush

atrafterend.

Fig.B

3/4"

(1,9 cm)

Gauge

Block

Gauge

Block

Fig.C

Flush