Assembly Manual

67
PARTSREQUIRED:
DORMER ROOF
x1
2" (5,1 cm)
x46
1
BEGIN
Place DORMERROOFUNIT on dormer.
Roofpanelsmaycauseseriousinjuryuntilsecurelyfastened.Twopeoplearerecommended.
2
3
Ensure KKA 2" x 6" extends past dormer panel by 4-1/8" at both sides (Fig.A) and is tight against
front dormer panel.
Mark truss locations on DORMERROOFUNIT and secure with 2" nails 6" apart along panel edges
and 12" apart in panel centers. Remove GAA temporary support from roof unit.
Pre-assembled
DORMERROOFUNIT
6"
(15,2 cm)
4-1/8"
(10,5 cm)
4-1/8"
(10,5 cm)
12"
(30,5 cm)
Flush
Flush
2"(5,1cm)
Nails
Fig.A
4-1/8"
(10,5cm)
Flush
KKA
KKA