Save This Manual for Future Reference Power Trackbarrow Operator’s Manual MODEL NUMBER YD8103 SERIAL NUMBER PURCHASE DATE Both model number and serial number may be found on the main label. (See Page 2, Figure 1) You should record both of them in a safe place for future use.
Your new YARDMAX® power trackbarrow offers quality construction, and is easy and safe to operate. With proper use and care, it is designed to give you many years of dependable service.
Power Trackbarrow Operator’s Manual » MODEL AND SERIAL NUMBERS Carefully read through this entire operator's manual before using your new unit. Pay attention to all cautions and warnings. This machine is a gasoline engine driven power trackbarrow. It is a durable, versatile and efficient machine, and it is both easy and safe to operate. With proper use and care, it should give you many years of dependable service.
support Have questions about your YARDMAX equipment? Call us at 844-YARDMAX, email us at support@yardmax.com, or contact us via your favorite social media site. Specifications Model Number Engine 208 cc Start Type Recoil Load Capacity 660 lbs Hopper Capacity 4.3 cu ft Track Width Box Dimensions (L x W x H) | Briggs & Stratton Displacement Speeds 3 YD8103 3 Forward / 1 Reverse 7” 34” x 25” x 11.
Power Trackbarrow » Operator’s Manual Symbols The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use. Read these instructions carefully. Wear eye protection. Wear hearing protection. Never start or run the engine inside a closed area. Wear protective gloves. Do not operate on slopes with angle over 20° or tip loading at an inclined position. Wear safety footwear. Be aware, objects may be thrown while in use.
SafETY GENERAL SAFETY RULES UNDERSTAND YOUR MACHINE Read this manual and labels affixed to the machine to understand its limitations and potential hazards. Be thoroughly familiar with the controls and their proper operation. Know how to stop the machine and disengage the controls quickly. Make sure to read and understand all the instructions and safety precautions as outlined in the Engine Manufacturer’s manual packed separately with your unit.
Power Trackbarrow Do not tamper with the engine in an effort to get it to run at higher speeds. The maximum engine speed is preset by the manufacturer and is within safety limits. See engine manual. Keep a Class B fire extinguisher on hand when operating this machine in dry areas as a precautionary measure. FUEL SAFETY Fuel is highly flammable, and its vapors can explode if ignited. Take precautions when using to reduce the chance of serious personal injury.
UNPACKING THE CONTAINER Use the screwdriver and hammer to open all the side locks. (See Figure 1a) 1 2 3 4 Figure 1a Remove all the plywood plates (Figure 1b), and remove all the loose parts on the bottom pallets.
Power Trackbarrow » Operator’s Manual CONTENTS SUPPLIED Your YARDMAX power trackbarrow comes partially assembled, and the package contains the following: 2 Premium 4-Cycle NET CONTENTS 35 OZ (1.05 L) 1 3 4 1. Machine 3. Operator’s Manual & Engine Manual 2. Engine Oil 4.
ASSEMBLY This trackbarrow was partially assembled at the factory. To assemble your machine and the optional plow blade follow the below instructions. PLOW BLADE (OPTIONAL) 1. M ount the mounting bracket to the blade using M8×30 hex bolts, washers and nuts. (See Figure 3a) 3. I nsert the shorter control lever into the longer lever. Align holes and fasten with M8×40 hex bolt, washers and nut.
Power Trackbarrow » Operator’s Manual 11 mm 11 mm 7. I nstall the already assembled plow blade to the trackbarrow as shown.
KNOW YOUR MACHINE FEATURES AND CONTROLS Engine On/Off Switch Throttle Control Right Steering Lever Clutch Control Lever Left Steering Lever Gear Selection Lever Hopper Gearbox Track Gas Spring Assistance 11 | Know Your Machine YD8103PM03 - 1802
Power Trackbarrow » Operator’s Manual Recoil Starter Handle Throttle Control Choke Control Fuel Shut-Off Valve GEAR SELECTION LEVER The gear selection lever has 4 positions: 3 forward speeds and 1 reverse. To change speeds, move the speed shift lever to the desired position. The lever locks in a notch at each speed selection. ENGINE ON/OFF SWITCH The engine switch has two positions. OFF - engine will not start or run. ON - engine will start and run.
OPERATION ADD OIL TO ENGINE IMPORTANT: DO NOT OVERFILL! No oil in the engine originally, but a bottle of engine oil is in scope of delivery. Don’t start the engine before adding oil. 1. M ake sure the power trackbarrow is on a flat, level surface. 2. R emove the oil fill cap/dipstick to add oil.
Power Trackbarrow FAST SLOW 4. M ove the throttle lever slightly to the FAST speed. 5. P ull the recoil starter until the engine starts. Return the recoil to the home position after each pull. Repeat the steps as needed. Once engine has started, set the throttle to the FAST position before you operate the unit. Rapid retraction of the starter cord (kickback) will pull your handand arm toward the engine faster than you can let go. Broken bones, fractures, bruises, or sprains could result.
MAINTENANCE 7 mm Maintaining your YARDMAX power trackbarrow will ensure long life to the machine and its components. PREVENTIVE MAINTENANCE 1. T urn off the engine and disengage all command levers. The engine must be cool. 2. K eep the engine’s throttle lever in its SLOW position and remove the spark plug wire from the spark plug and secure. 3. I nspect the general condition of the power trackbarrow.
19 mm 12 mm Power Trackbarrow » Operator’s Manual 17 mm X2 REPLACING DRIVE BELT Adjustment Nut 1 10 mm 11 mm Remove the belt covers as show. (See Figure 6a) X2 13 mm Jam Nut M8×20 (×4) Belt Cover 13 mm Jam Nut X2 Lock Nut Lock Nut 9 mm 17 mm 30 mm 2 3 8 mm 19 mm mm 18 Adjustment Nut Jam Nut 7 mm M6×20 12 mm mm 30 Lock Nut Belt Cover for Gearbox Pulley Figure 5a If the above adjustment does not create enough cable tension, follow the steps below: Figure 6a 17 mm 1.
LUBRICATION 3. M easure the track midline vs. the horizontal line. The reading must not be more than 0,4”~0,6”. The gearbox is pre-lubricated and sealed at the factory. No need to lubricate until 50 hours use. After first 50 hours use, change all the transmission oil. Capacity is 1.5L. For future use, just check the oil level every 50 hours of working. If remove the drain plug, no oil flow out, then add the oil.
Power Trackbarrow » Operator’s Manual 3. Loosen the adjusting bolts and pull the steering wheel axle toward the engine, then track will be loosen. (See Figure 9b) Steering Wheel 24 mm Steering Wheel 24 mm Steering Wheel Axle Steering Wheel Axle Adjusting Bolt Figure 8b Do not over-tighten your track. The adjustment of the track and the brakes are linked. The braking power will lessen the more the track is tightened. Figure 9b 4. Pull out the whole track.
STORAGE If the power trackbarrow will not be used for a period longer than 30 days, follow the steps below to prepare your unit for storage. 1. D rain the fuel tank completely. Stored fuel containing ethanol or MTBE can start to go stale in 30 days. Stale fuel has high gum content and can clog the carburetor and restrict fuel flow. 2. S tart the engine and run until it stops. This helps prevent gum deposits from forming inside the carburetor and possible engine damage. 3.
Power Trackbarrow » Operator’s Manual TROUBLESHOOTING Problem Cause 1. Spark plug wire is disconnected 2. Out of fuel or stale fuel 3. E ngine and/or Fuel valve is not in ON position Engine fails to start 4. Choke lever is not in CLOSE position 5. Blocked fuel line 6. Fouled spark plug 7. Engine flooding 8. Belt tension lever is engaged Remedy 1. A ttach spark plug wire securely to spark plug 2. Fill with clean, fresh gasoline 3. E ngine and Fuel valve must be in ON position 4.
PARTS DIAGRAM 21 | Parts Diagram YD8103PM03 - 1802
Power Trackbarrow » Operator’s Manual Gearbox YD8103PM03 - 1802 Parts Diagram | 22
PARTS LIST No. Description Qty No. Description Qty No. Description Qty 1 Tensioner Pulley Cable 1 37 Tensioner Pulley Bracket 1 73 Track 180×60 2 2 Safety Control Handle 1 38 Engine 1 74 Axle Head Cover(42) 2 3 Screw M6×16 1 39 Key 4.
Power Trackbarrow No. Description Qty No. Description Qty No.
Plow Blade (Optional) OPTIONAL PLOW BLADE No. Description Qty No. Description Qty No.
Power Trackbarrow YD8103PM03 - 1802 » Operator’s Manual 26
yardmax.com Tame the Great Outdoors 844-YARDMAX (844-927-3629) | ® info@yardmax.