+ ■■■■■ "" ■ ■■■I 7 Save This Manual for Future Reference Gas Log Splitter Operator's Manual MODEL NUMBER YU2566 □ □ YU2866 □ YU3066 □ YU3566 + SERIAL NUMBER I I PURCHASE DATE I I Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use. FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE Tame the Great Outdoors· 65916US25M104_GB.
Your new YARD MAX® gas log splitter offers quality construction, and is easy and safe to operate. With proper use and care, it is designed to give you many years of dependable service. Prepare to experience the durability to take on any job with the ease, portability, and convenience of clean, gas splitting! Discover the YARDMAX Advantage At YARDMAX, we understand that land ownership definitely has its privileges, but it also comes with a great deal of responsibility.
+ -----■■■■■ ■■■ -------I "" 7 Gas Log Splitter » Operator's Manual � Carefully read through this entire operator's manual before using your new unit. Pay attention to all cautions and warnings. This unit is a gasoline engine driven hydraulic log splitter. It is designed to split wood logs for use as firewood for a stove or fireplace. This log splitter will only split logs lengthwise with the grain.
SUPPORT Have questions about your YARD MAX equipment? Call us at 847-327-0566 or 844-YARDMAX, email us at support@yardmax.com, or contact us via your favorite social media site. t + SPECIFICATI ON S Model# Splitting Force* Log Capacity YU2566 YU2866 YU3066 YU3566 25ton 28ton 30ton 35ton 26" 26" 26" 26.5" Briggs & Stratton Briggs & Stratton 208cc 306cc 9.5ft-lb 14.5ft-lb Fuel Capacity 0.80Gallon 1.40Gallon Engine Oil Capacity 0.16Gallon 0.
+ -----■■■■■ ■■■ -------I "" 7 Gas Log Splitter » Operator's Manual Model# YU2566 YU2866 YU3066 YU3566 Pump Size 14GPM 14GPM 17GPM 17GPM 4" 4.5" 4.5" 5" 24" 24" 24" 24" 1.75" 1.75" 1.75" 2" 9.7 seconds 13.2 seconds 10.9 seconds 12.8 seconds 4.2Gallon 4.5Gallon 4.5Gallon 6.
SYMBOLS The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use. Never remove partially split wood from the wedge with your hands. Fingers may become trapped between the split wood. Read these instructions carefully. � i) fj () {i (i) @ + ® ® � � 5 & Keep hands and feet away from moving parts. Moving parts can crush or cut. Wear eye protection. Wear hearing protection. Keep hands away from the log stripper.
+ -----■■■■■ ■■■ -------I "" 7 Gas Log Splitter » Operator's Manual SAFETY GENERAL SAFETY RULES UNDERSTAND YOUR MACHINE Read this manual and labels affixed to the machine to understand its limitations and potential hazards. Be thoroughly familiar with the controls and their proper operation. Know how to stop the machine and disengage the controls quickly.
+ ENGINE SAFETY This machine is equipped with an internal combustion engine. Do not use on or near any unimproved, forest covered, or brush covered land unless the exhaust system is equipped with a spark arrester meeting applicable local, state, or federal laws. In the state of California, a spark arrester is required by law. Other states have similar laws. A spark arrester, if used, must be maintained in effective working order by the operator. Never start or run the engine inside a closed area.
t SPECIFIC SAFETY RULES PREPARATION OF T HE LOG VERTICAL OPERATING POSITION Both ends of the log should be cut as square as possible to prevent the log from rotating out of the splitter during operation. Never split logs greater than the specified log capacity. Do not operate the log splitter on icy, wet, muddy, or slippery ground. Only operate your log splitter on level ground.
TOWING SAFETY Check all local and state regulations regarding towing, licensing, and lights before towing your log splitter. Before towing the log splitter, check tires for excessive wear, cuts, or damage. Check for proper tire inflation. Add air as required. Do not over inflate tires. Serious injury can result if tires explode.
----- i=-tv■■■■■ ----- 11• Ill Pl ■■■■ Gas Log Splitter » Operator's Manual UNPACKING THE CONTAINER Use the screwdriver and hammer to open all the side locks. Remove all the polywood plates. Remove all the loose parts on the bottom pallets. Use scissors or a knife to cut all the straps. (See Figure 1a) -��� -c;;_�,: + •-·--c�· + Figure 1a Figure 1b Unpacking the Container YU2566PM02-1703 65916US25Ml04_Gll.
CONTENTS SUPPLIED Your YARD MAX log splitter comes partially assembled and contains the following: Heavy lifting required. Some of the components in these assembly instructions are heavy and can't be lifted by one person safely. Please plan to assemble this product when another person can be available to help. + + 1. Beam with Cylinder 2. Reservoir with Engine 3. Beam Lock Bracket 4. Pivot Bracket 5. Log Cradle (Left) 14. Hardware Kit, Including: f} @ M22 X2 4XS0 X2 [) X2 @)) @) 00 © 6.
-----■■■■■ ■■■ -------I "" Gas Log Splitter » 7 Operator's Manual ASSEMBLY This log splitter was partially assembled at the factory. To assemble your machine follow the below instructions. WHEELS 1. 3. At least two people are needed to move the reservoir outside Assistant holds the engine, while the other person assembles the wheel opposite of the engine first. of the pallet. Place the engine at the end corner of the pallet.
+ 8. Insert the cotter pin through the hole in the axle. Bend open and spread the prongs in opposite directions so the axle nut will not come off (make sure the tire spins freely). After the beam and cylinder assembly is in the vertical position, a helper is needed to prevent the beam from tipping over until it is secured on the hydraulic tank assembly with the hitch pin and R-clip. Installation of the cotter pin is important and required.
+ 2. PIVOT BRACKET Align the holes in the pivot bracket with the holes on the beam and insert and tighten bolts, spring washers, and flat washers. Align the pivot bracket on the beam assembly to the pivot mount on the tank weldment and insert the beam pivot pin and washer. (See fisure 7b) �I Pivot Bracket The beam can be very heavy and dangerous if that it tips over and may cause personal injury. / � / /� ' .�� . ,; / ✓• •.
+ 2. Hold the lifting handle and slowly lower the beam. It will lock automatically. Double check to make sure the beam bracket is locked onto the beam. Lil � 2. Follow step 1 to assemble the left log cradle. (See Figure 10) Do not let the beam suddenly drop. Keep hands and fmgers clear of pinch or crush points at all times. Lifting Handle Beam Lock Bracket Figure 10 M12X35 FigureSb MANUAL TUBE 1. Remove the cap from the manual tube.
+ -----■■■■■ "" ■■■ -------I Gas Log Splitter » Operator's Manual KNOW YOUR MACHINE FEATURES AND CONTROLS log Table (Optional) Log Spinner Foot Plate 2-Position log Cradle G¥iWD·M UrtI@MiI:ttflk Qj@H§ IMftffl;ttflii - Mttffl@ :f&WtttMrttl@I l$M,\1Miiti·I· 44iij0tffl Beam Lock Bracket Beam Assembly Support'Leg j:fflii=HAMMUff ®t#f#3M Hydraulic Pump 11 Control Valve Know Your Machine I 16 YU2566PM02-1703 65916US25M104_GB.
+ ©! Mtffitltl-tltNllttm► ' \ @ g% a JqQ, ---Ecc::::_,. I®'Uttirtflffii #lfiffll#•Utki0- LOG SPINNER FOOT PLATE )) The foot plate holds the log in place while the wedge splits the log. LIFTING HANDLE )) The lifting handle is included for easy transition from horizontal to vertical. 2• BALL HITCH COUPLER )) The foot plate allows the operator to easily spin a log in prep for splitting and allows the log to rotate when splitting instead of causing unnecessary stress on the beam.
-----■■■■■ ■■■ -------I "" Gas Log Splitter » Operator's Manual THROTTLE CONTROL FUEL SHUT-OFF VALVE )) The fuel shut - off has two position. CLOSED (S)) - use this position to service, transport, or store the )) OPEN (_m) - use this position to run the unit. unit. )) The throttle control regulates the speed of the engine and will shut off the engine when it is moved to the STOP position. The throttle control moves between FAST 9, SLOW .... and STOP positions.
+ STARTING ENGINE STOP ENGINE 1. Make sure the control lever is in the neutral position. Return the cylinder to fully retracted position or home position. Move the Throttle lever to SLOW (-A). Move the engine switch to OFF. Close the fuel shut-off valve (Ii)). Sudden stopping at a high speed under a heavy load is not recommended. Engine damage may result. SPLIT CONTROL HANDLE 3. Open the fuel shut-off valve.
-----■■■■■ ■■■ -------I "" 7 Gas Log Splitter » Operator's Manual CONVERSION BETWEEN HORIZONTAL SPLITTING POSITION AND VERTICAL SPLITTING POSITION Neutral Position Forward Horizontal Beam Lock ■:fffl@·l,iMIMM, Figure 12a Lifting Handle + + Reverse Position Neutral Position Forward Position Figure 12b STUCK LOG PROCEDURE If a log does not split completely and becomes stuck on the wedge, never attempt to remove it by modifying the splitter or adding attachments to the splitter.
+ TRANSPORTING MOVING BY HANDS 3. Make sure hitch is in good working order. T he log splitter is heavy. It can crush and cause 4. Check safety chains. Two safety chains must be used while towing. Cross safety chains under the coupler, allowing only enough slack for vehicle turns. Follow the instructions below for safely moving the log splitter. 5. Pull out the lock lever and put the support leg in the UP position, then release the lever and make sure the leg is secured.
+ -----■■■■■ ■■■ -------I 7 Gas Log Splitter » Operator's Manual MAINTENANCE Inspect and maintain the log splitter before each use. If the log splitter has been used previously, it must be inspected and maintained before each subsequent use. Always shut off the engine and relieve system pressure before inspecting, cleaning, adjusting, or repairing the splitter. Relieve system pressure by moving the split control lever back and forth several times. ADD HYDRAULIC OIL TO OIL TANK 1.
STORAGE Follow the instructions below for storing your log splitter between uses. 1. Retract the wedge completely to keep the rod protected from corrosion. 2. Allow the machine to cool 5 minutes before storing. 3. Clear the debris from the beam, wedge, and end plate. Use a damp cloth to clear exterior surfaces of the engine and log splitter. Use a soft bristle brush to remove excess dirt and oil. Use an air compressor (25 PSI) to clear dirt and small debris.
i t -----■■■■■ ■■■ -------I Gas Log Splitter » Operator's Manual TROUBLESHOOTING Problem Cause 1. Air in the hydraulic oil system Wedge movement is slow or erratic 2. 3. Debris lodged in beam guides Low hydraulic oil 4. Clogged hydraulic filer Oil leak from cylinder 1. Faulty cylinder rod seal 2. 3. Scored or bent cylinder rod Loose hydraulic fitting 4. Faulty combination washer seal on cylinder hydraulic fitting Oil leak from hose connection 2. 4. Replace hydraulic filter 1.
$ lb_ .... YU2566/YU2866 9 5 11 10 � �� � � 6 �B 14 "'\.� _ o=o--@-'---��{ -rr - ! \ 12 7� �----- 4 105 � � � 0 V') � � 17 21 � n I 16 15 5 _.... -------�;---- -i �1�� l1nr ujA ,_,c-0.--..-d .--..--, �.._,. 'Ii' / d ff 1l - � L --- 30 29- 1 \1Q§_ � .1Ql __ 37 36 24 ,� _- I 91 93 \ \ \�� •e- ____ 88 -�� -=-@-.. 107 B6 106 , ---= 27 rr 1 [i • Parts List on page 30 1* ii -- '"' :.
+ ■■■ -------- -----■■■■■ I 7 Gas Log Splitter » Operator's Manual YU2566/YU2866 PARTS LIST No. Description Qty No. Description Qty No.
YU3066 • Parts List on page 30 93 106 r-..
i + ■■■ -------- -----■■■■■ I 7 Gas Log Splitter » Operator's Manual YU3066 PARTS LIST No. Description Q ty No. Description Qty No.
$ lb_ YU3566 9 10 � \ 11 15 14 LA�� � 5 16 -- _ , -- ; OO \\L- --� - .----:�CJ------ L - • ��� ' : 30 29-1 - i 25 - ______ _ ____ ---=��- I �=-r-1 �\1.1. i;;r. J- -�� ,109 14 12 66 - -- _ 37 36 24 (� � 7 /�� ..2.1 r-}I 11 vr------- 92 - 102 I -;;/ 1 33 -=-=----- , J rr 98 ! • Parts List on page 30 �-T� �1� 11 1* fl fl �- - 4* --7I; � ;; ----=---.1 �- 27 � 13 14 .-Ho Ain_i�-•- ·: � + ---®-- 0 68 -� ...
11 ■■■ -------- -----■■■■■ I 7 Gas Log Splitter » Operator's Manual YU3566 PARTS LIST Description No. Qty No. Description Qty No. Description Qty 1 Pin35x59 1 40 Spring Washer8 4 79 -1 Clamp25 -38 2 2 Bridge Pin 1 41 BoltM8x20 6 80 -1 Suction Hose 1 3 Hose Clamp40 1 42 Washer8 8 81 Return Oil Filter 1 4 Hex Socket Head Cap Screw M6x20 1 43 BoltM12x90 2 82 O-Ring D81x3.
----■■■■■ ■■■ ------I 7 yardmax.com + ® Tame the Great Outdoors 847-327-0566 or 844-YARDMAX I 65916US25M104_GB.indd 31 info@yardmax.