4-Ton Log Splitter model number 060-3823-0 Please read and understand this manual before beginning any use or assembly of the product, and make sure all parts are present. Questions? If you have any questions or need replacement parts, please call our toll-free helpline at 1-866-523-5218. Instruction Manual 65556CA01M130_GB.
65556CA01M130_GB.
STOP ARRÊT For problems or questions, DO NOT RETURN TO STORE. Please contact one of our Customer Service Agents who would be happy to assist you. En cas de problèmes ou si vous avez des questions, NE RETOURNEZ PAS L’ARTICLE AU MAGASIN. Contactez plutôt un de nos agents du service à la clientèle, qui se fera un plaisir de vous aider. For Customer Assistance Please Call: Pour le service à la clientèle, veuillez composer: CANADA: 1-866-523-5218 65556CA01M130_GB.
Table of Contents model no. 060-3823-0 | contact us 1.866.523.5218 mod Specifications 5 Important Safety Instructions 6 Symbols 8 Parts List 9 Exploded View 12 Parts Location 13 Important Information 14 Before Assembly 15 Assembly 17 Operation 18 Maintenance 23 Storage 25 Troubleshooting 26 Environmental Protection 27 Warranty 27 65556CA01M130_GB.
model no. 060-3823-0 | contact us 1.866.523.5218 ELECTRIC GRASS TRIMMER/EDGER 4-Ton Log Splitter 060-3823-0 120 V, 60 Hz, 15 A, 1 3/4 HP 2–10" (5– 25 cm) 20 1/2" (52 cm) 4 Tons 16 MPa 3.2 L Specifications Product Name Model Number Motor Log Capacity (Diameter) Log Capacity (Length) Splitting Force Hydraulic Force Hydraulic Oil Capacity DIMENSIONS Length Width Height Product Weight 37" (94 cm) 10 1/2" (27 cm) 20" (51 cm) 95 lb (43 kg) NOTE: The log capacity in diameter is only a guideline.
Important Safety Instructions model no. 060-3823-0 | contact us 1.866.523.5218 IMPORTANT! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow safety instructions may result in electric shock, fire, and/or serious personal injury. • Read and understand all instructions and all labels affixed to the log splitter. Learn the applications, limitations, and specific potential hazards before using this log splitter.
• • • Do not operate the log splitter in dangerous environments. Do not use the log splitter in wet or damp conditions, and do not expose it to rain. In order to avoid potential fire hazards, never use the log splitter in an explosive atmosphere where there are fumes from paint, solvents, and other flammable liquids. Keep children and visitors away. Never allow children or untrained adults to operate the log splitter. Make the workshop childproof. Disconnect the power cord.
model no. 060-3823-0 | contact us 1.866.523.5218 Symbols Symbol Name Designation/Explanation Read the instruction manual. User must read and understand the instruction manual and all labels affixed to the product before using this product. Inspect the log splitter. Inspect the log splitter for any malfunctioning or damaged components. Do not wear loose clothing, neckties, or jewellery (rings, wrist watches), because they can get caught in Dress properly. moving parts.
Item Description Qty 1 2 3 4 5 6 7 8 9 10 11 12 13 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 35 36 37 38 39 40 Lever mount nut Nut Cap M10 Lever Lever knob Guard plate Nut Copper Gasket Screw M8 O-Ring 5.5x2 Snap Washer – Shaft Valve Retract Spring O-Ring , 6.7x1.8 Valve Core Rod Aluminum Cover (Rear) O-Ring 55x3.1 Piston Piston Ring O-Ring 32x3.5 Spring Stud Hydraulic Cylinder Aluminum Cover (Front) Piston Rod Seal O-Ring 7x1.
Parts List model no. 060-3823-0 | contact us 1.866.523.5218 mod Item Description Qty 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 Nut Nut Plug Flat Washer Groupware M18 Valve Sleeve O-Ring 12.5x1.
Item Description Qty 76 77 78 79 80 81 82 83 84 85 86 87 88 89 91 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 110 Seal Nut Screw Motor Fan Block Turn Shroud Spring Washer Screw Leg Washer Bolt Leg Cover Cable & Plug Cord Stop Screw Switch Box Cover Airproof Underlay Connection Terminal Capacitor Switch Switch Box Waterproof Underlay Left Motor Support Shoe Right Motor Support Shoe Pin Spring Sliding Sleeve Bolt Fuse Manual Retaining Valve 1 1 1 1 1 1 1 3 3 1 2 2 1 1 1 11 1 1 1 1 1 1 1
1 2 3 4 5 6 7 2 58 59 38 60 61 38 8 9 49 50 11 47 10 48 A 45 12 13 110 46 106 42 B 41 40 39 24 38 37 36 18 19 20 21 22 23 44 43 105 104 103 25 102 101 35 100 34 99 98 97 93 26 27 28 29 60 96 95 93 94 F D C E 77 78 62 63 64 65 66 68 69 70 71 72 73 74 105 75 73 82 83 84 79 90 80 76 67 81 63 91 30 31 89 108 85 86 87 88 107 32 2017/11/22 20:56:35 65556CA01M130_GB.indd 12 56 55 54 53 55 52 51 57 64 Exploded View 12 mod model no. 060-3823-0 | contact us 1.
Item Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Log pusher Work table Wedge Support leg Log retaining plates Motor Pushbutton box Pushbutton switch Wheels (for minor moving only) Hydraulic control Lever Control lever guard Maximum pressure limiting screw Bleed screw Oil drain bolt with dipstick 1 2 Parts Location model no. 060-3823-0 | contact us 1.866.523.5218 3 11 10 13 9 14 8 7 6 5 4 10 12 65556CA01M130_GB.
Important Information model no. 060-3823-0 | contact us 1.866.523.5218 NOTE: The safe use of this product requires an understanding of the information on the product and this operator’s manual as well as knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 1. INTENDED USE This log splitter is intended for household use only. Do not use this log splitter for industrial or other commercial application.
model no. 060-3823-0 | contact us 1.866.523.5218 UNPACKING INSTRUCTIONS • Carefully remove the log splitter and its accessories from the box. • Check and make sure all parts and accessories are included before using the log splitter for the first time. Refer to the Parts Location section. • Inspect the log splitter and its accessories for any damage. • If there is any damage or missing parts and/or accessories, contact the customer service helpline at 1-866-523-5218 before using the log splitter.
model no. 060-3823-0 | contact us 1.866.523.5218 mod Before Assembly ELECTRICAL REQUIREMENTS •U se a standard 120 V (±10%) 60 Hz (±1 Hz) AC only electrical supply that has undervoltage, over-voltage, and over-current protection devices as well as a residual current device (RCD) with a maximum residual current rated at 0.03 A for the log splitter.
model no. 060-3823-0 | contact us 1.866.523.5218 CAUTION! To avoid possible electric shock, switch off the power supply at the main fuse or circuit breaker box before assembling, servicing, or cleaning the log splitter. • I nstall the wheel onto the axle with the front side of the wheel facing outward. • Push the hitch pin through the hole in the axle until it locks. • Place the wheel cover in the centre where the axle protrudes from the wheel and push to lock the wheel cover in place.
model no. 060-3823-0 | contact us 1.866.523.5218 mod CAUTION! Operation •B efore using the log splitter, make sure that the work area is clear of obstructions, clutter, children, and pets. Work only in an area with ample lighting. • Dress properly. Wear rubber gloves and non-skid, steel-toed footwear. • When splitting logs, wear safety goggles to protect against eye injury. 1. CHECK THE OIL • Ensure the log splitter is disconnected from the power supply.
model no. 060-3823-0 | contact us 1.866.523.5218 Bleed screw 2. LOOSEN THE BLEED SCREW • Turn the bleed screw 3 full turns. WARNING! Always loosen the bleed screw before operating the log splitter. Failure to loosen the bleed screw may cause the seals in the hydraulic system to rupture and cause serious physical injuries and/or permanent damage to the log splitter.
model no. 060-3823-0 | contact us 1.866.523.5218 mod WARNING! Operation • Do not place the log at an angle against the wedge to split the log on the upper part (fig. 2). Doing so can break the wedge or damage the machine. • Do not place the log crosswise on the splitter (fig. 3). This is dangerous and may seriously damage the machine. • Do not split more than one log at a time. One of them may fly out the splitter and cause injury.
model no. 060-3823-0 | contact us 1.866.523.5218 WARNING! Do not crouch on the ground, sit down on a log beside the splitter, or kneel down by the log splitter (fig. 5). Always keep your hands and body out of the splitting or operating zone while using the log splitter. Operation 5 d. U sing your right hand, push and hold down the pushbutton switch (fig. 6). e. While holding down the switch with your right hand, use your left hand to push the hydraulic control lever down (fig. 6).
model no. 060-3823-0 | contact us 1.866.523.5218 Operation f. Stop the log splitter by simultaneously releasing the hydraulic control lever and the switch (fig. 7). Wait for the log pusher to return to its starting position mod 7 g. Repeat steps b through f for the other logs. h. When the splitting of all logs is complete or if the machine will be unattended for any period of time, unplug the cord from the power supply (fig. 8). 8 i.
model no. 060-3823-0 | contact us 1.866.523.5218 Maintenance WARNING! To avoid possible electric shock, always disconnect log splitter from the power supply and tighten the bleed screw before cleaning, making adjustments, or conducting maintenance work on the log splitter. REPLACING THE HYDRAULIC OIL Replace the hydraulic oil in the log splitter after every 150 hours of use.
model no. 060-3823-0 | contact us 1.866.523.5218 mod • Wipe the dipstick clean and insert it back into the oil tank to check for the oil level. Maintenance •R emove the dipstick and check for oil level. The level of the refilled oil should be between the 2 grooves of the dipstick. If not, add or decrease the amount of oil in the tank until the level is between the 2 grooves of the dipstick.
model no. 060-3823-0 | contact us 1.866.523.5218 SHARPENING THE BLADE CLEANING • Clean the log splitter using a clean, damp cloth. Use a soft brush on the splitting area and the motor ventilation area to remove any wood debris. • DO NOT immerse the log splitter in water or other cleaning agents. Maintenance After using the log splitter for some time, sharpen the blade or wedge using a fine-toothed file. Smooth out any burns or crushed areas along the cutting edge.
model no. 060-3823-0 | contact us 1.866.523.5218 Troubleshooting Problem The log splitter does not split logs. The log pusher moves jerkily, makes an unfamiliar noise, or vibrates excessively. Oil leaks around the cylinder ram or from other points. 65556CA01M130_GB.indd 26 mod Possible Reason Solution The log is not positioned correctly. Refer to the Operation section for instructions on proper log loading. The size or hardness of the log exceeds the capacity of the machine.
Used electrical products are recyclable and should not be discarded in your regular domestic waste. Please actively support us in conserving resources and protecting the environment by returning this appliance to a collection centre (if available). or ng. e Do not dump used oil into drains, soil, or water. Dispose of used oil only at an authorized collection point or follow the regulations that are in effect in your area.
Imported by YardWorks Canada Toronto, Canada M4S 2B8 65556CA01M130_GB.