User Manual

model no. 060-1983-0 | contact us: 1.866.523.5218

WARNING: Always wear eye protection. Never lean over the

trimmer head. Rocks or debris can ricochet or be thrown into

eyes and face and cause blindness or other serious injury.

WARNING: Make sure that line is fed out before operation. Make sure

motor is up to full speed before trimming.

1. SWITCH ON/OFF

To switch on, press the lock-off button rst, then the On/Off Switch. (See Fig. F.)

To switch off, release the On/Off Switch.

2. TRIMMING

1) Keep the trimmer head at an angle of about 30° to the ground when trimming. (See Fig. G1.)

2) Do not cut wet grass because it tends to stick to the trimmer head and guard, prevents

proper discharge of grass clippings, and could cause you to slip and fall.

3) Regularly remove clippings and dirt around the trimmer head. Ensure the trimmer is

switched off.

4) Work rhythmically; stand rmly with your feet apart. Cut from right to left so the trimmings

will be thrown away from the work area. (see Fig. G2.)

5) When cutting longer/high grass, please make sure that you cut it down in 2 to 3 stages.

(see Fig. G3, G4.).

6) Do not move the trimmer too fast as this will result in ineffective cutting and possible damage.

Locking/

Release knob

Guide recess

Locking/

Release knob

Guide recess

Locking/

Release knob

Guide recess

Operation