20˝ (51 CM) BRUSHLESS 3-IN-1 LAWN MOWER model number 060-1981-4 | contact us: 1.866.523.5218 3026035 IMPORTANT: Read and follow all safety rules and operating instructions before using this product.
model no. 060-1981-4 | contact us: 1.866.523.
model no. 060-1981-4 | contact us: 1.866.523.
model no. 060-1981-4 | contact us: 1.866.523.5218 Please do not operate garden equipment near children. This could lead to severe injury or death. Introduction INTRODUCTION Congratulations on your purchase of your new Yardworks® tool. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Should you experience any problem you cannot easily remedy, please contact our Yardworks® customer service line at 1.866.523.5218.
READ ALL INSTRUCTIONS FOR ALL LAWN MOWERS 1) Avoid dangerous environments — Don’t use lawn mowers in damp or wet locations. 2) Don’t use in rain. 3) Keep children away — All visitors should be kept a safe distance from work area. 4) Dress properly — Do not wear loose clothing or jewellery. They can be caught in moving parts. Use of rubber gloves and footwear is recommended when working outdoors. 5) Use safety glasses — Always use face or dust mask if operation is dusty.
Safety Instructions model no. 060-1981-4 | contact us: 1.866.523.5218 FOR ALL BATTERY-OPERATED GARDENING APPLIANCES: 1. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that has the switch on invites accidents. 2.
d) e) f) g) h) i) j) k) l) m) n) o) p) q) battery terminals together may cause burns or fire. Do not remove battery pack from its original packaging until required for use. Do not subject battery pack to mechanical shock. In the event of battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Safety Instructions model no. 060-1981-4 | contact us: 1.866.523.5218 7. Do not pull machine backwards unless absolutely necessary. Always look down and behind before and while moving backwards. 8. Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blade when crossing gravel surfaces. 9.
other debris build-up. 4. If you strike a foreign object, stop and inspect the machine. Repair, if necessary, before starting. 5. Never make any adjustments or repairs with the motor running. 6. Always unplug electric mowers before adjusting, cleaning, or repairing. 7. Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary. 8. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. 9.
Safety Instructions model no. 060-1981-4 | contact us: 1.866.523.5218 1.4 Maintenance a) Check the blade and the motor mounting bolts at frequent intervals for proper tightness. b) Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition. c) Check bag frequently for deterioration and wear, and replace worn bags. Check that replacement bags comply with the original manufacturer’s recommendations or specifications. d) Replace the blade if it is bent or cracked.
model no. 060-1981-4 | contact us: 1.866.523.5218 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product effectively and safely.
Product Specifications model no. 060-1981-4 | contact us: 1.866.523.5218 PRODUCT SPECIFICATIONS Voltage No load speed Deck size Cutting width Cutting height range Collection capacity Cutting height positions 48 V 2800/min 20" (51 cm) 19" (48 cm) 1 1/2 – 4" (3.8 – 10.2 cm) 50 L (1.4 Bushels) 7 positions Front wheel diameter Rear wheel diameter Battery capacity (ABP4850SH) Charging input Charging output (060-1990-2) Charging time Machine weight 8" (20.3 cm) 11" (28 cm) 5.
model no. 060-1981-4 | contact us: 1.866.523.5218 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 1 2 3 4 7 5 8 6 9 10 11 14 12 13 19. Mulching block 19 WARNING: any other accessory or attachment may increase the risk of injury.
model no. 060-1981-4 | contact us: 1.866.523.5218 Assembly To reduce the risk of injury, user must read instruction manual Intended Use This product is intended for domestic lawn mowing. • Mowing with grass collection bag attached - Standard lawn mowing with grass collection bag attached. • Mowing with side discharge chute attached - use the side discharge chute instead of grass collection bag, and grass clippings are ejected from the mower on the right hand side of the deck.
2 1 model no. 060-1981-4 | contact us: 1.866.523.5218 2 1 A1 A2 A3 A4 2. ASSEMBLING THE UPPER HANDLE 1) Attach the upper handle onto the outside of the lower handle. Be sure to carefully align the holes found on the lower handle and the upper handle. (See Fig. B1.) 2) Insert the bolt (a) through aligned holes from the inner side of the lower handle. Then a bolt from the outside of the upper insert the upper handle lock knob into the end of the handle. (See Fig. B2.
model no. 060-1981-4 | contact us: 1.866.523.5218 Assembly 3. GRASS COLLECTION BAG FITTING 1) Raise the rear discharge guard and hold it up, remove the mulching block if it is in the rear chute. (See Fig. C1.) 2) Raise the rear discharge guard and hold it up. Pick up the grass collection bag by the handle, and position the left and right hooks of grass collection bag onto the mower (See Fig. C2, C3.) 3) Release the rear discharge guard. Ensure the grass collection bag is installed securely.
4. REMOVING / EMPTYING THE GRASS COLLECTION BAG - Removing (See Fig. D) Raise the rear discharge guard and hold it up. Lift the grass collection bag by the handle upwards a little, and then remove the grass collection bag from the rear discharge chute. - Emptying As soon as you see mown grass debris on the lawn, the grass collection bag needs to be emptied. 1) Empty the grass clippings from the grass collection bag into the appropriate bin.
Assembly model no. 060-1981-4 | contact us: 1.866.523.5218 5. ASSEMBLY OF THE SIDE DISCHARGE CHUTE NOTE: The side discharge chute is used to distribute grass clippings from the side of the mower while it is in use. To use this function, the grass collection bag is NOT required to be assembled on the lawn mower. 1) Remove the grass collection bag if it is fitted. Refer to Removing / Emptying the grass collection bag section.
model no. 060-1981-4 | contact us: 1.866.523.5218 The lawn mower has one cutting height adjustment lever to easily adjust the cutting height. The lawnmower can be set to 7 cutting heights between 1 1/2”–4” (3.8–10.2 cm). 1) To increase the cutting height, pull the cutting height adjustment lever outward towards the rear wheel and move it up a notch, towards the rear of the lawn mower.
Operation model no. 060-1981-4 | contact us: 1.866.523.5218 1. CHARGING THE BATTERY PACK IMPORTANT NOTES FOR CHARGING BATTERY The battery in your new tool is not charged when it leaves the plant; therefore, it must be full charged before using the first time. NOTE: If the battery pack is very hot, remove the battery from the charger and allow it to cool to ambient temperature before attempting to recharge.
model no. 060-1981-4 | contact us: 1.866.523.5218 CHARGING INDICATOR This charger is designed to detect some problems that can arise with battery packs. Indicator lights indicate problems (see table below). Light ON/ Flash Status Battery Temperature Protection. The temperature of battery pack is less than 0oC (32oF) or more than 40oC (104oF). Red flash Fully Charged. Green on Charging Green flash 2. INSTALLING AND REMOVING THE BATTERY PACK 1) Slide the battery pack into tool’s battery port.
model no. 060-1981-4 | contact us: 1.866.523.5218 Operation OPERATION 1. STARTING AND STOPPING STARTING (SEE FIG. I) Depress the safety button first and pull the switch lever towards the handle, then the mower will start. STOPPING Release the switch lever to stop the mower. 2 1 I WARNING: Keep hands, feet, hair and clothing away from all the moving parts of the lawn mower. Make sure that the blade is securely fastened before starting the mower.
4. MOWING TIPS (Catcher Mowing + Side Discharge Mowing) NOTE: Always inspect area where mower is to be used and remove all stones, sticks, wire, metal and other debris which might be thrown by the rotating blade. 1) It is recommended to mow your lawn more frequently, walk at normal pace, and not to start/stop the mower too often during operation. 2) For best performance, please use a fully charged battery pack.
Operation model no. 060-1981-4 | contact us: 1.866.523.5218 Under normal conditions, the mulched grass will biodegrade quickly to provide nutrients to the lawn. Please review the following recommendations for optimum mulching performance. 1) Avoid mowing when the grass is wet from rain or dew. Wet grass may form clumps which interfere with the mulching action and reduce runtime.
model no. 060-1981-4 | contact us: 1.866.523.5218 BLADE SHARPENING KEEP BLADE SHARP FOR BEST MOWER PERFORMANCE. A DULL BLADE DOES NOT CUT GRASS CLEANLY OR MULCH PROPERLY. BE SURE THE MOWER IS TURNED OFF AND REMOVE THE BATTERY PACK. WEAR PROPER EYE PROTECTION AND GLOVES PROTECTION WHILE REMOVING, SHARPENING, AND INSTALLING BLADE. Sharpening the blade twice during a mowing season is usually sufficient under normal circumstances. Sand causes the blade to dull quickly.
model no. 060-1981-4 | contact us: 1.866.523.
Stop the mower. Remove the battery back. Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and debris, especially from the ventilation slots. Turn the machine on its side and clean the blade area. If grass cuttings are compacted in the blade area, remove with a wooden or plastic implement. Store the machine in a dry place. Do not place other objects on top of the machine.
model no. 060-1981-4 | contact us: 1.866.523.5218 The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem, contact Yardworks® at 1-866-523-5281. Troubleshooting Problem Mower doesn’t run when switch lever is activated. Motor stops while mowing. Mower runs but cutting performance is unsatisfactory, or does not cut entire lawn. Mower is too hard to push. Mower is abnormally noisy and vibrates.
10 13 14 15 16 1 3 2 4 5 6 7 8 9 11 12 17 18 19 38 39 40 Exploded View 29 model no. 060-1981-4 | contact us: 1.866.523.
model no. 060-1981-4 | contact us: 1.866.523.5218 Item No. Description QTY.
model no. 060-1981-4 | contact us: 1.866.523.5218 For five (5) years from the date of purchase within Canada, YARDWORKS® CANADA will, at its option, repair or replace for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship (excludes battery).
model no. 060-1981-4 | contact us: 1.866.523.5218 FCC Part 15 Supplier’s Declaration of Conformity Product Description: 48V 2.0A Charger Model Number: 060-1990-2 Trade Name: YARDWORKS® This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Positec USA, Inc.
1 20” (51 CM) BRUSHLESS 3-IN-1 LAWN MOWER Quick Start Guide Item # 060-1981-4 contact us: 1.866.523.5218 ASSEMBLY 1. OPEN THE LOWER SHORT HANDLE AND ASSEMBLE THE UPPER HANDLE. 1) Turn the lower handle lock knob out (See Fig. A1.) Open the lower handles to align the hole on the lower handle and the one of the three holes on the deck.(See Fig. A2.) Rotate the lower handle lock knob into the aligned holes to lock. (See Fig. A3, A4.
2 20” (51 CM) BRUSHLESS 3-IN-1 LAWN MOWER contact us: 1.866.523.5218 2. GRASS COLLECTION BAG FITTING 1) Raise the rear discharge guard and remove the mulching block. (See Fig. C1.) 2) Pick up the grass collection bag by the handle, and position the left and right hooks of grass collection bag onto the mower. (See Fig. C2.) 3) Release the rear discharge guard. C1 C2 3. ASSEMBLY OF THE SIDE DISCHARGE CHUTE 1) Raise the rear discharge guard and insert the mulching block into the rear chute. ( See Fig. D1.
3 20” (51 CM) BRUSHLESS 3-IN-1 LAWN MOWER contact us: 1.866.523.5218 PREPARE 1. CHARGING PROCEDURE (See Fig. E) 1) Plug the charger (Not included) into an appropriate outlet. 2) The light will flash green when charging. When fully charged, the light will turn solid green. E 2. ADJUSTING THE CUTTING HEIGHT (See Fig. F) Pull the cutting height adjusting lever to the front or rear notch. F * This information is provided for your convenience.
4 20” (51 CM) BRUSHLESS 3-IN-1 LAWN MOWER Item # 060-1981-4 contact us: 1.866.523.5218 3. INSTALLING THE BATTERY PACK ( SEE FIG. G) Slide the battery pack into tool’s battery port. A simple push and slight pressure will be sufficient. Quick Start Guide G OPERATION STARTING (SEE FIG. H) Depress the safety button first, and pull the switch lever towards the handle, then the mower will start.