User Manual

model number 054-5763-6 | contact us: 1.866.523.5218

GSPNCFMPX:BCPVUPGUIFEJBNFUFSJOUPUIFMPHVOEFSCVDLBOEªOJTIUIFDVUGSPNBCPWF

;JOPSEFSUPBWPJEMPHTQMJUUJOHPSKBNNJOHPGUIFDIBJOTBX

SAW MAINTENANCE

Follow maintenance instructions in this manual. Proper cleaning of saw and chain and guide

bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use.

This will increase the service life of your saw.

NOTE: Even with proper sharpening, risk of kickback can increase with each sharpening.

MAINTENANCE AND STORAGE OF CHAINSAW

If the replacement of the supply cord is necessary, this has to be done by the manufacturer or

his agent in order to avoid a safety hazard.

1. Unplug chainsaw from power source:

• When not in use.

• Before moving from one place to another.

• Before servicing.

• Before changing accessories or attachments, such as saw chain and guard.

2. Inspect chainsaw before and after each use. Check saw closely if guard or other part has

been damaged. Check for any damage that may affect operator safety or operation of saw.

Check for alignment or binding of moving parts. Check for broken or damaged parts. Do not

use chainsaw if damage affects safety or operation. Have damage repaired by authorized

service centre.

3. Maintain chainsaw with care.

• Never expose saw to rain or direct moisture.

• Keep chain sharp, clean, and lubricated for better and safer performance.

• Follow steps outlined in this manual to sharpen chain.

• Keep handles dry, clean, and free of oil and grease.

• Keep all screws and nuts tight.

• Inspect power cord often. If damaged, have repaired by authorized service centre.

Assembly