User Manual

model number 054-5763-6 | contact us: 1.866.523.5218

• Never carry chainsaw by power cord.

• Never yank power cord to unplug it.

• Keep power cord from heat, oil, and sharp edges.

• Inspect extension cords often and replace if damaged.

4. When servicing, use only identical replacement parts.

5. When not in use, always store chainsaw:

• in a high or locked place, out of children’s reach.

• in a dry place.

• With bar and chain cover (21) in place.

BAR MAINTENANCE

To maximize bar life, the following bar maintenance is recommended.

• The bar rails that carry the chain should be cleaned before storing the tool or if the bar or

chain appear to be dirty.

• The rails should be cleaned every time the chain is removed.

CLEANING THE BAR RAILS

1. Remove chain cover and bar and chain. (see section ASSEMBLY)

2. Using a wire brush, screwdriver or similar tool, clear the residue from the inner groove of the

bar. (See Fig. M)

3. Make sure to clean oil passages thoroughly.

Assembly