Assembly Instructions

Yardworks® Broadcast Spreader
Model YSB10M
How to Use Your Yardworks® Broadcast Spreader
INSTRUCTIONS INSIDE - SAVE FOR FUTURE REFERENCE
• Applies lawn care products quickly and accurately
• Hopper holds 10,000 sq. ft. of lawn fertilizer
1. Raise handle. Tighten wing nuts by hand.
2. Turn the rate dial to the correct setting
listed on the back of your product
package under “rotary spreader”
or “broadcast spreader”.
3. Fill hopper with lawn product
of your choice. Clean up any
product that spills onto hard surfaces.
4. To apply product, begin walking,
then squeeze and hold trigger.
NOTE: To avoid potential lawn damage,
always push spreader in a forward motion when applying
fertilizer. Release trigger at turns or when you stop.
P/N: MS3134
Guaranteed by:
Swiss Farms Products, Inc.
3993 Howard Hughes Parkway
Suite 250
Las Vegas, NV 89169-6754
©2018 Distributed by Menard, Inc.
Eau Claire, WI 54703
ASSEMBLED IN THE U.S.A.
Visit MENARDS.COM®
Black Dieltblue
Black
Menyards Standard Spreader Instruction Card - Booklet
75002-1
MS3134
55398
Booklet ICC_6906H01_75002-1
10.30.17 2:23 PM
Kim Donohue/KM
11” x 8.5”
1
94
N/A
N/A
N/A
6
Flexo
THIS PAGE PRINTS AT 65% OF THE ORIGINAL LABEL TO FIT ON 11” x 17” PAGE
2

Summary of content (4 pages)