Operation Manual

Basic Operations
• Power on: Set the ON/OFF switch to the
ON position.
• Power off: Press and hold the [Play/pause]
button to power off. If you do not plan on using
the player for a long time, please set the
ON/OFF switch to the OFF position.
Note: When battery power is low, the player will
automatically power off.
• Adjusting volume: In the Music or Record
modes, press the [VOL-] or [VOL+] button to
decrease or increase the volume.
• Charging the player: To charge your player, set
the ON/OFF switch to the ON position and
connect the player to computer or charger
using the included USB Cable. It takes
approximately 2.5 hours to completely charge
the device.
LOADING FILES
There are two methods of loading les to the
player, using Windows Media player, or copy
and pasting the les to the device. Please note
that this player supports audio les in MP3,
or a non encrypted WMA format. If your les are
not in one of these formats, or the les are DRM
encrypted, they will NOT play on this player.
Using Windows Media Player
(Note: you must use Windows Media Player 10
or later to use this feature.)
(Note: this player does not support DRM
ecrypted audio files, such as those
downloaded from the Windows Media Player
download service.)
1. Open Windows Media Player and connect the
MP3 player to a working USB port. Windows
Media player will prompt you with a setup
screen asking you to name the MP3 player.
2. Once you have named your MP3 player,
select Finish, and your Windows Media Player
will open to the Sync tab.
3. Drag your music to the sync list (on the right
of the screen) from the list on the left. Once
you have selected the music you wish to add
to the player, press Sync.