Specifications

FILM LOADING

Use 35 mm cassette film. Always load and unload film in subdued light (never in direct sunlight).

1. Open the Camera Back by pulling the Film Rewind Knob all the way out.

2 Install the cassette in the Film Chamber and push down the Film Rewind Knob. If it does not return smoothly

to its original position, push it down while twisting it back and forth.

3. Pull out the film tip and insert it into any one of the slots in the Take-up Spool.

4. Operate the Film Advance Lever slowly to advance the film. Make sure the sprocket teeth catch the

perforations and close the Camera Back.

5. Fold out the Film Rewind Crank and turn it gently in the direction of the arrow to take up film slack.

< Film Advance Lever>

By turning the Film Advance Lever as far as it will go, the film will advance one frame and the shutter will be

cocked at the same time. Unless it is fully turned, the shutter will not trip.

6. Wind the Film Advance Lever and depress the Shutter U Release Button. Repeat this operation until the

Exposure Counter shows "1". The film is advancing properly if the Film Rewind Knob turns while you wind the

Film Advance Lever.