Specifications

3 Electrical Installation
YASKAWA ELECTRIC TOEP C710616 27A YASKAWA AC Drive - A1000 Quick Start Guide 9
 Wiring Specification
 Main Circuit
Use the fuses and line filters listed up in the table below when wiring the main circuit. Make sure not to exceed the given
tightening torque values.
Tightening Torque Values
Tighten the main circuit terminals using the torque values provided by the table below.
 Control Circuit
The control terminal board is equipped with screwless terminals. Always use wires within the specification listed below.
For safe wiring it is recommended to use solid wires or flexible wires with ferrules. The stripping length respectively
ferrule length should be 8 mm.
Model
CIMR-A
<1> Terminal +3 is available in drives from 2A0169 to 2A0211 and 4A0088 to 4A0165 only.
EMC Filter
[Schaffner]
Main Fuse
[Bussmann]
Recom.
Motor cable
(mm²)
Main Circuit Terminal Sizes
R/L1,S/L2,T/L3, U/T1,V/T2,
W/T3, - , +1, +2, +3 <1>
B1, B2
2A0004
FS5972-10-07
FWH500V70 2.5 M4 M4 M4
2A0006 FWH500V70 2.5 M4 M4 M4
2A0010 FWH500V70 2.5 M4 M4 M4
2A0012
FS5972-18-07
FWH500V70 2.5 M4 M4 M4
2A0021 FWH500V90 2.5 M4 M4 M4
2A0030
FS5972-35-07
FWH500V100 6 M4 M4 M5
2A0040 FWH500V200 10 M4 M4 M5
2A0056 FWH500V200 16 M6 M5 M6
2A0069
FS5972-60-07
FWH500V200 16 M8 M5 M6
2A0081 FWH500V300 25 M8 M5 M6
2A0110
FS5972-100-07
FWH500V300 35 M8 M8 M8
2A0138 FWH500V350 50 M10 M10 M8
2A0169
FS5972-170-40
FWH500V400 70 M10 - M8
2A0211 FWH500V400 95 M10 - M8
4A0002
FS5972-10-07
FWH500V40 2.5 M4 M4 M4
4A0004 FWH500V50 2.5 M4 M4 M4
4A0005 FWH500V70 2.5 M4 M4 M4
4A0007 FWH500V70 2.5 M4 M4 M4
4A0009
FS5972-18-07
FWH500V90 2.5 M4 M4 M4
4A0011 FWH500V90 2.5 M4 M4 M4
4A0018
FS5972-35-07
FWH500V80 2.5 M4 M4 M5
4A0023 FWH500V100 4 M4 M4 M5
4A0031 FWH500V125 6 M5 M5 M6
4A0038
FS5972-60-07
FWH500V200 6 M5 M5 M6
4A0044 FWH500V250 16 M6 M5 M6
4A0058 FWH500V250 16 M8 M8 M8
4A0072
FS5972-100-35
FWH500V250 25 M8 M8 M8
4A0088 FWH500V250 25 M8 M8 M8
4A0103
FS5972-170-35
FWH500V250 35 M8 - M8
4A0139 FWH500V350 50 M10 - M10
4A0165 FWH500V400 70 M10 - M10
Terminal Size M4 M5 M6 M8 M10
Tightening Torque (Nxm) 1.2 to 1.5 2.0 to 2.5 4.0 to 6.0 9.0 to 11.0 18.0 to 23.0