User`s manual

MP Series Ethernet (Extension) Driver

GP-Pro EX Device/PLC Connection Manual

4.2 Setup Items in Off-Line Mode

 Communication Settings

To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in off-line mode. Touch the

External Device you want to set from the displayed list.

• Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line

mode or about the operation.

Cf. Maintenance/Troubleshooting Manual "2.2 Off-line Mode"

Setup Items Setup Description

Port No.

Enter a port number of the GP-Pro EX.

Select either of "Fixed" "Auto". Enter a port number of the GP-Pro EX with "1024-65535",

when select "Fixed". Assign automatically without affecting the input value, when select

"Auto".

Timeout

Use an integer from 1 to 127 to enter the time (s) for which Display waits for the response

from External Device.

Retry

In case of no response from the External Device, use an integer from 0 to 255 to enter how

many times the Display retransmits the command.

Wait To Send

Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving

packets to transmitting next commands.