Manualshelf

Specifications

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed G7
61626364656667686970
64
Typical Connection Diagrams
With Transistor at 0V Common/Sink Mode
Varispeed G7
IM
With Transistor at 0 V Common/Sink Mode from External Power Supply
Varispeed G7
IM
With Transistor at ＋24 V Common/Source Mode
Varispeed G7
IM
With Contact Output, Open Collector Output
Varispeed G7
IM
When input signal is a sequence connection (0 V common/sink mode) by NPN
transistor using ＋24 V internal power supply, set CN5 (shunt connector) on the
control board to NPN.
When input signal is a sequence connection (＋24 V common/source mode) by
PNP transistor using ＋24 V internal power supply, set CN5 (shunt connector) on
the control board to PNP.
When input signal is a sequence connection (0 V common/sink mode) by NPN
transistor using ＋24 V external power supply, set CN5 (shunt connector) on the
control board to EXT.
Note: Same for PNP transistor at
＋24 V common/source mode