Specifications

ManualsBrandsYASKAWA ManualsConsumer electronicsVarispeed G7

Option Cards

Type

Built-in type (connected to connector)

Speed (frequency) reference card

Monitor option card

Name

TOE-

C736-30.21

TOBP

C73060026

TOE-

C736-30.24

TOE-

C736-40.8

AO-08

AO-12

DO-08

DO-02C

Analog monitor card

AO-08

Analog monitor card

AO-12

Digital output card

DO-08

2C-relay output card

DO-02C

Model Function

Manual No.

DI-08

TOBP

C73060030

Allows 8-bit digital speed reference setting.

・Input signal:

Binary 8 bits/BCD 4 digits ＋ SIGN signal ＋ SET signal

・Input voltage:

＋24 V (isolated

) ・Input current: 8 mA

Outputs analog signal for monitoring inverter output state (output freq.,

output current etc.) after absolute value conversion.

・Output resolution: 8 bits (1/256)

・Output voltage: 0 to ＋10 V (non isolated) ・Output channel: 2 channels

TOE-

C736-30.13

AI-14U

Analog reference card

AI-14U

Allows high precision, high resolution analog speed reference setting.

・Input signal level:

0 to ＋10 VDC (20 kΩ) 1 channel

4 to 20 mADC (250

) 1 channel

・

Input resolution: 14 bits (1/16384)

TOBP

C73060015

AI-14B

Analog reference card

AI-14B

Digital reference card

DI-08

Allows bipolar high precision, high resolution analog speed reference setting.

・Input signal level:

0 to ±10 VDC (20 kΩ)

4 to 20 mADC (500

) 3 channels

・

Input resolution: 13 bits ＋ code (1/8192)

TOBP

C73060031

DI-16H2

Digital reference card

DI-16H2

Allows 16-bit digital speed reference setting.

・

Input signal: Binary 16 bits/BCD 2 digits ＋ SIGN signal ＋ SET signal

・Input voltage:

＋24 V (isolated

) ・Input current: 8 mA

With 16-bit/12-bit select function

Outputs analog signal for monitoring inverter output state (output freq.,

output current etc.)

・Output resolution: 11 bits (1/2048) + code

・Output voltage: −10 to ＋10 V (non isolated) ・Output channel: 2 channels

Outputs isolated type digital signal for monitoring inverter run state

(alarm signal, zero speed detection etc.) .

Output channel: Photo coupler 6 channels (48 V, 50 mA or less)

Relay contact output 2 channels

250 VAC, 1 A or less

30 VDC, 1 A or less

・Two multi-function contact outputs (2C-relay) can be used other than

those of the inverter proper unit.

SI-C

CC-Link

communications I/F card

SI-C

TOBZ-

C736-70.6

SIBP

C73060008

TOBP

C73060008

SIBP

C73060007

Used for running or stopping the inverter, setting or referencing

parameters, and monitoring output frequency, output current, or similar

items through CC-Link communication with the host controller.

SI-J

LONWORKS

communications I/F card

SI-J

＊1

Used for HVAC control, running or stopping the inverter,setting or

referencing parameters, and monitoring output current,watt-hours, or

similar items through LONWORKS communications with the host controller.

TOE-

C736-40.1

TOBP

C73060009

PG-A2

PG-B2

PG-A2

PG-B2

Used for vector control with PG or V/f control with PG

・Phase A and B pulse inputs (exclusively for complementary input)

・PG frequency range: Approx. 30 kHz max.

[ Power supply output for PG: ＋12 V, Max. current 200 mA]

・Pulse monitor output: Open collector, ＋24 V, Max. current 30 mA

Pulse generator on motor performs speed feedback to correct speed

fluctuations caused by slipping (for V/f control with PG).

・Phase A pulse (single pulse) inputs (voltage, complementary, open

collector input)

・PG frequency range: Approx. 30 kHz max.

[ Power supply output for PG: ＋12 V, max. current 200 mA ]

・Pulse monitor output: ＋12 V, 20 mA

PG speed controller card

＊2

Communications option card

SI-T

MECHATROLINK-Ⅱ

communications I/F card

SI-T

Used for running or stopping the inverter, setting or referencing parameters,

and monitoring output frequency, output current, or similar items through

MECHATROLINK-

Ⅱ communication with the host controller.

DeviceNet

communications I/F card

SI-N1

＊1

SI-N1

Used for running or stopping the inverter, setting or referencing

parameters, and monitoring output frequency, output current, or similar

items through DeviceNet communication with the host controller.

SIBP

C73060001

SI-P1

Profibus-DP

communications I/F card

SI-P1

＊1

Used for running or stopping the inverter, setting or referencing

parameters, and monitoring output frequency, output current, or similar

items through Profibus-DP communication with the host controller.

SIBZ-

C736-70.9

TOBP

C73060011

CANopen

communications I/F card

SI-S1

―

SI-S1

Used for running or stopping the inverter, setting or referencing

parameters, and monitoring output frequency, output current, or similar

items through CANopen communication with the host controller.

RoHS Compliant