Instruction manual

142
Constants added with software version upgrades will be displayed when
VERIFY is performed for VS-606V7 Inverters without the additional
constants and VS-606V7 Inverters with the additional constants.
The constants added with each software version upgrade are shown in
the following table.
Refer to page 196 (Constants List) for deitals.
Example: Comparing Constants Stored in EEPROM in Operator with
Constants in Inverter
Software No.
Additional Constants
VSP010015
or later
n175
VSP010020
or later
n077, n078, n079, n115, n116
VSP010024
or later
n040, n041, n042, n043, n044, n064, n101,
n102, n117, n118, n119, n166, n167, n168,
n169, n173, n174
VSP010028
or later
n045, n046, n047, n048, n049, n170, n171,
n172
Explanation Operator Display
• Enable the set-
tings for con-
stants n001 to
n179.
• Press to lit
.
• Press to display
the set value.
• Change the set value to 4
by pressing the or
key.
• Press .
(May be a different constant No.)
(Lit)
(May be a different set value.)
(Flashes)
(Lit for one second.)
↓
(The constant No. is displayed.)
DSPL
PRGM
ENTER
ENTER