Instruction manual

28
• Inverters with Width of 180
mm
Use a screwdriver to loosen the
screw on the terminal cover
surface to direction 1. Then
press the right and left sides in
direction 2 and lift the terminal
cover in direction 3.
 Mounting the Terminal Cover
Mount the terminal cover by
reversing the order of the above
procedure for removal.
 Removing the Digital
Operator
After removing the front cover, lift
the upper and lower sides (section
A) of the right side of the Digital
Operator in direction 1.
 Mounting the Digital Operator
Mount the Digital Operator by
reversing the order of the above
procedure for removal.
1
2
2
3
A
A