Instruction manual

6. Programming Features

When operating with frequency larger than 60/50 Hz, change only the

Max. Output Frequency (n011).

 Switching LOCAL/REMOTE Mode

The following functions can be selected by switching LOCAL or

REMOTE mode. To select the RUN/STOP command or frequency ref-

erence, change the mode in advance depending on the following appli-

cations.

• LOCAL mode: Enables the Digital Operator for RUN/STOP com-

mands and FWD/REV RUN commands. The fre-

quency reference can be set using the potentiometer

or .

• REMOTE mode: Enables RUN Command Selection (n003).

The frequency reference can be set using the Fre-

quency Reference Selection (n004).

Constant torque

Constant output or

variable output

Base point

n013

=60 or 50 Hz

n011

=90 Hz

012

200 V