User`s manual

10
2 Checking the Product
Check the following items as soon as the product is delivered.
Contact your Yaskawa representative immediately if any failure should be found concerning the
above items.
2.1 Nameplate
The following diagram shows the nameplate on the side of the SI-T/V7 Unit.
* “X” indicates the design revision order.
2.2 Parts List
The SI-T/V7 Unit contains the following parts.
Item Method
Is there any discrepancy between the shipment and
what was ordered?
Check the information printed on the Unit. Refer to 2.1
Nameplate.
Has the product been damaged in any way? Inspect the entire exterior of the Unit for any damage that
may have occurred during shipping.
Are the contents of the package correct? Check the contents. Refer to 2.2 Parts List.
SER NO :
YASKAWA ELECTRIC
CORPORATION
LOT NO :
PRG :
CODE NO : 73606-V706X
INTERFACE UNIT SI-T/V7
MASS : 0.5kg
MADE IN
JAPAN
M
S
Manufacturing No.
Lot No.
Program No.
Code No.*
SI-T/V7 Unit type
Mass
Parts Name Qty
SI-T/V7 Communications Interface Unit
1
Mounting fixture
1
M3 × 8 SW screw
1
Grounding cable (small)
1
Grounding cable (medium)
1
Grounding cable (large)
1