User`s manual

 Operating the Digital Operator
All functions of the VS mini are set by the digital operator. Below are
descriptions of the display and keypad sections.
29
DIGITAL OPERATOR
Press to switch
between
function LEDs.
Press to increase
constant no./data
value.
Press to decrease
constant no./data
value.
Function display LEDs
(
Color in parenthesis indicates the color of LED.
)
Press to stop the motor.
(Press to reset at faults.)
Press to run
the motor.
Frequency setting
potentiometer
Changes frequency
setting according to
potentiometer.
Data display section Status indicator
FREF
Frequency reference
setting/monitoring
(GREEN)
FOUT
Output frequency
monitor
(GREEN)
IOUT
Output current
monitor
(GREEN)
F/R
Operator RUN
command FWD/REV
selection
(GREEN)
PRGM
Constant no./data
(RED)
MNTR
Multi-function
monitor
(GREEN)
LO/RE
LOCAL/REMOTE
Selection
(RED)
Function display LEDs
LED switches to another
function each time
DSPL is pressed.
The displayed data can
be changed.
Press to enter the
constant data.
(Displays the constant
data when
selecting constant no.
by PRGM LED.)