WA202 USER MANUAL DESIGN
Welcome Dear YBA owner, We thank you for the purchase of your YBA DESIGN WA202 receiver. We are confident that it will provide you with many years of listening pleasure. YBA DESIGN products have been manufactured with the same proud and care as all other products we've made since our creation in 1981. Your new WA202 enables you to get the very best audio quality from your sources. This user manual has been designed to give you all the information you need to install, connect, setup and use your device.
Warnings and precautions CAUTION: To reduce the risk of electric shock, do not try to open the device. No user serviceable parts inside. Refer servicing to qualified service personnel only. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that maybe of sufficient magnitude to constitute a risk of electric shock.
locate it away from any flammable material or any object which may react to heat. Racks and stands Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination. Cleaning Unplug the unit from the mains supply before cleaning. The case should normally only require a wipe with a soft, damp, lint-free cloth.
Warranty information Manufacturer information: information YBA SAS (RCS Evry 339 630 790) - 5, avenue du 1 Mai - 91120 PALAISEAU - France Tel: (33)-1 - 60 12 51 00 Fax: (33)-1 - 60 12 50 60 http://www.ybadesign.com - contact@yba.fr What is covered (extracts from the limited warranty contract): YBA warrants this product to be free from defects in materials and workmanship subject to the terms set forth below.
Discovering your WA202: Front view ON/OFF switch: Use this key to switch ON or switch OFF your WA202. DISPLAY and IR sensor: Any information concerning your WM202 will be indicated here. Point the remote control to this zone to control your WA202 from a distance. SOURCE selector: Use this key to cycle between all the inputs of your WA202 (CD Video Aux iPod Tuner CD ...).
and : The + and - keys have 2 functions according to the WA202 state: 1. Volume control: control Press - to decrease and + to increase the volume. 2. When TUNER is the active source and one FUNCTION is selected by pressing the F key , the + and the - allow you to modify the tuner settings: If the PRESET function is selected, + will go to next memory slot while - will go to previous memory slot. If the SEEK function is selected, + will seek for next radio station while - will seek for previous radio station.
Discovering your WA202: Back view CAUTION: Before connecting or disconnecting any input or output: Always make sure your WA202 is in OFF position. If you have any doubt, unplug the AC cable from the power inlet. Make sure all components connected to it are all set to off. Neatly arrange and organize wiring to and from your WA202 and to and from all your components. Separate AC wires from audio cables to prevent hum or other unwanted noise from being introduced into the system.
Right and Left speaker output: Connect your speakers here. Be sure to respect the polarity: the + of your speaker must be connected to the + of the WA202. Connect your RIGHT speaker to the R (red) output of your WA202 and the LEFT speaker to the L (black) output of your WA202. We recommend the use of banana plugs to prevent short-circuit. This device was designed to be used with 8 or 4 ohms speakers. It was not designed to handle speakers with a less than 4 ohms impedance.
connect a YBA iPod dock so the battery of your iPod can be charged. This port is only for charging your iPod/iPhone and shall not be used to connect a computer or any other USB device. If you want to listen to the content of your iPod note that your iPod must also be connected to any of the WA202 RCA inputs, such as the input named "iPod" input. Note: If you do not have a YBA iPod dock and still want to charge your iPod, you can also connect here the original white USB cable provided with your iPod/iPhone.
Using YBA DESIGN remote control Point your remote control to the IR receiver located in the display window of your WA202. Select the device you want to control between AMP, CD and AUX. To control the WA202, you need to select AMP . Note: AMP will remain the active function until you select another device.
Note: PRESS means a short press on a key while HOLD means to keep the key pressed for more than 3 seconds. Source selector: Press SOURCE key to cycle between the 5 inputs of your WA202 (CD VIDEO AUX IPOD TUNER CD...). Volume control keys: Press VOLUME key to change the volume: Press - to decrease the output level and press + to increase it. VIEW: VIEW Hold ( 3 seconds) to switch ON/OFF the display (dimmer). Press, when TUNER is the active source to change the RDS display information.
FCT: Hold ( 3 seconds) to store current volume level. Press, when TUNER is the active source, to cycle between the tuner functions (PRESET SEEK TUNE AUTOSET RDS VOLUME PRESET ...). OK: Hold, when TUNER is the active source, to store current frequency in one of the memory slots (see FAQ on next page). AUDIO: Press to resume to the stored volume level. AUDIO MUTE: Press to mute the output. Press again to exit mute. Using the TUNER (FAQ) About RDS.
current playlist or news) and CT (Clock Time). Your WA202 will automatically display any RT information. If not available it will display any PS information. If not available it will display the frequency. Press VIEW to change displayed information between PS, RT, CT and Frequency. How to store a radio station. AUTOSTORE 1. First select tuner as the active source 2. Press F on the front panel to select AUTOSET function 3. Press + or - to start. Note that all previously stored stations will be erased.
WA202 SPECIFICATIONS AUDIO OUTPUTS 1 pair of speaker outputs, 1 preout (RCA) POWER OUTPUT (8 ) 50W per channel SNR FREQUENCY RESPONSE THD+N (20Hz-20kHz) 90dB 20Hz-20kHz 0.01% INPUTS 4 RCA inputs TUNER BANDS AM, FM TUNER MEMORIES 40 in FM, 40 in AM USB POWER SUPPLY Type B, 5V, 600 mA maximum POWER SUPPLY Linear power supply with high performance EI type transformer.
NEED MORE INFORMATION? WWW.YBADESIGN.COM CONTACT@YBA.