User Manual Part 1

Link CX-24 User’s Manual
Version 1.0 Page 28 February 2004
Figure 2.10 – Typical Ethernet Link CX-24 Commission Manager Web Page
2.10.3 Testing a DS-3 Link CX-24
17 On the Commission Manager Interfaces page, select the link for the Test page. The web browser
displays the Test page, similar to the sample shown in Figure 2.11.
18 On the Test page, select the BERT + Radio Loop-back test, and select One Minute. Select Start Test
to verify the internal Link CX-24 circuitry before installation. When the BERT + Radio Loop-back test
is complete, the Link CX-24 has been configured, and the internal signal generation, transmit,
receive, and detecting circuitry of the Link CX-24 has been tested.
19 On the Test page, select the link for the Commission Radio page. The web browser again displays
the Commission Radio page, similar to the sample shown in Figure 2.7.
20 Continue with Step 25.