User's Manual
13
APPENDIX B (Continued)
FCC Part 15 Certified Systems
FCC certified systems consist of:
• A2440-xxF amplifier, DC Injector and 12 VDC Power supply
• Nokia C111 WLAN card with the FCC ID#: ORE-C110-C111
• Outdoor Antenna
• Coax Cable (See Table D)
• Consult the YDI web site for the most current product and certification information www.ydi.com
Table C - Nokia Authorized Antennas
Model
Antenna Type
Antenna
Gain (dBi)
Max
EIRP (dBm)
MPE Distance
(cm)
YDI PT2424
Grid dish Antenna
24
48
71
YDI PT2421
Grid dish Antenna
21
45
50
YDI A2.45FP18
Flat Panel Antenna
18
42
36
YDI A2.45FP15
Flat Panel Antenna
15
39
25
YDI A2.45FP12
Flat Panel Antenna
12
36
20
YDI A2.45LP17
Long Panel Antenna
17
41
32
YDI A2.45LP14
Long Panel Antenna
14
38
23
YDI A2412
Omni Antenna
12
36
20
YDI A2410
Omni Antenna
10
34
20
YDI A2408
Omni Antenna
9
33
20
YDI FP12A
Amplified Flat Panel Antenna
12
36
20
YDI FP18A
Amplified Flat Panel Antenna
18
42
36
Note:
1. MPE distance figures are based on a conservative “worst case” prediction, i.e. +24 dBm into
antenna using formula S=EIRP/(4piR2) and no calculation for duty factor. In practice the
minimum distance will be much shorter.
2. The minimum MPE distance has been calculated for the maximum allowed Power Density (S) limit
of 1.0 mW/cm2 in the Frequency range 1500-100,000 MHz for uncontrolled environments (Ref.2).
Reference:
1. FCC Part 15, sub-clause 15.247 (b)(4)
2. FCC OET Bulletin 65, edition 97-01
3. FCC Supplement C to OET Bulletin 65, edition 97-01
FCC ID#: NM5-C111E