User's Manual

ii
PROFESSIONAL INSTALLATION REQUIRED
The Model AMP2440 Amplifier and antennas used must be professionally installed by
experienced antenna installation professionals who are familiar with radio frequency
(RF) issues such as gains and losses, as well as local building and safety codes.
Failure to do so will void the product warranty and may expose the end user to
excessive RF hazards. Regulations regarding maximum antenna gains, amplifier power
gain and maximum permissible exposure vary from country to country. It is the
responsibility of the end user to operate within the limits of these regulations and to
ensure that the professional installers adhere to the antenna installation instructions
contained in this manual and comply with RF exposure regulations for transmitter
operating conditions. All antennas are intended to be installed outdoors.
FCC NOTICE
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment when installed as directed. The antenna/transmitter device must be fixed-
mounted on outdoor permanent structures with a separation distance of at least 2 meters
between the antenna and all persons during normal operation.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received including interference that may
cause undesired operation.