User's Manual

4.0 Amplifier Kit

Each Amplifier Kit Includes:

• Bi-directional remote mounted amplifier

• DC Power Injector

• 12 VDC, 110/220 VAC power supply

• Stainless steel U-bolts and mounting bracket for amp

• Installation Manual

The following options are also available and may be ordered separately:

CAB-DC

DC power cable with 2.1mm plug to 3 foot long flying lead. Used when

the customer provides his own 12 VDC power for the DC injector or

amp.

Dual-DC

Option to add second power jack on DC injector to enable one 12 VDC

PS that comes with the amp to power both the Injector and the radio or

AP. (Requires a DC jumper cable.)

DC-2.1-2.1

DC jumper cable that connects a radio modem or Access Point to the

second DC power jack on the DC injector box. Radio devices must have

a 2.1 mm ID power jack and operate on 12 VDC.

DC-2.1-2.5

DC jumper cable used for radios and Access Points that have a 2.5 mm

ID barrel jack.

Close up of the bracket and

mounting hardware attached to the

amplifier.

IMPORTANT:

Only

mount the amplifier with the

connectors facing downward.

Do not mount it with the

connectors facing sideways or

upwards which will void the

warranty.