Product Card

7
Red LED: Power LED, lights when the computer turns on.
Green LED: Blinks when receiving data.
Orange LED: Blinks when transmitting data.
Note: Handle the card carefully! Be sure not to damage or break the surface mount LED’s off the card
when installing/removing the card!
The card is operating normally when the green or orange LED blinks alternately, and the red LED stays
steadily lit.
After inserting the card, install the device driver following the instructions in the Software Installation
section. If a message that the PC failed to recognize the card appears, check the card by following the
"Wireless LAN diagnostics" procedure.
A WL2400-ISA supports ISA Plug and Play. The card is automatically recognized and installed in
Windows 95/98 environment. If your system does not support the Plug and Play, you can use a utility for
ISA PnP (not included in the package).