User Manual

Configuring Advanced Features
197
Procedure
IPv6 can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the IPv6 address
assignment method.
For more information, refer to
IPv6 on page 372.
Local
Web User Interface
Configure the IPv6 address
assignment method.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network&q=load
To configure IPv6 address assignment method via web user interface:
1. Click on Network->Basic.
2. Select the desired address mode (IPv6 or IPv4&IPv6) from the pull-down list of
Mode (IPv4/IPv6).
3. In the IPv6 Config block, do one of the following.
- If you mark the Static IP Address radio box, configure the IPv6 address and
other configuration parameters in the corresponding fields.