User Manual

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
274
Range
Valid values are:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid green)
Example
phone_setting.common_power_led_enable =
1
Parameter-
phone_setting.ring_power_led_
flash_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the power indicator LED to
flash when the phone receives an incoming
call.
If it is set to 0, the status of the power indicator
LED is determined by the value of the
parameter
“phone_setting.common_power_led_enable”.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled (power indicator LED does not
flash)
1-Enabled (power indicator LED fast flashes
(300ms) green)
Example
phone_setting.ring_power_led_flash_enable =
1
Parameter-
phone_setting.mail_power_led_
flash_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the power indicator LED to
flash when the phone receives a voice mail or
a text message.
If it is set to 0, the status of the power indicator
LED is determined by the value of the
parameter
“phone_setting.common_power_led_enable”.
Format
Boolean