Enterprise IP Phone SIP-T27P & T27G Quick Start Guide (V80.1) www.yealink.com Applies to firmware version 45.80.0.1 or later.
Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Handset Cord IP Phone Handset Quick Start Guide Ethernet Cable Power Adapter （Optional） Stand Wall Mount Bracket （Optional） Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T27G IP phone as an example. Assembling the Phone 1.
. Connect the network and power, as shown below: You have two options for network and power connections. Your system administrator will advise you on which one to use. PC Connection Power Adapter (Optional) (DC 5V) A AC Power Option B PoE ( Power over Ethernet ) Option PC Connection (Optional) IEEE 802.3af compliant PoE Hub/Switch Note: If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is PoE-compliant.
Configuring Your Phone Configuring via web user interface Accessing the web user interface: 1. Press the OK key when the phone is idle to obtain the IP address of the phone. 2. Open a web browser on your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10") and then press Enter. 3. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Send soft key. Using the speakerphone: . 1. With the handset on-hook, press 2. Enter the number, and then press the Send soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Send soft key.
