User's Manual

Basic Call Features

Call Forward

You can configure your phone to forward incoming calls to another party by the static

forwarding. You can also forward calls while your phone is ringing, refer to the dynamic

forwarding.

Static Forwarding

You can configure three types of call forward:

z Always Forward: Incoming calls are immediately forwarded.

z Busy Forward: Incoming calls are immediately forwarded if the phone is busy.

z No Answer Forward: Incoming calls are forwarded if not answered after a period of

time.

You can enable/disable the call forward feature for the phone system, or you can

customize the call forward feature for each account or all accounts. The following

describes the call forward modes:

z Phone: Call forward in phone mode means that the call forward feature is

effective for the phone system.

z Custom: Call forward in custom mode means that you can configure the call

forward feature for each account or all accounts.

To configure the call forward mode via web user interface:

1. Click on Features->Forward & DND.

2. In the Forward block, mark the desired radio box in the Mode field.

3. Click Confirm to accept the change.

Note

You can configure the call forward mode via web user interface only.