User's Manual

Network Settings:

Account Settings:

Configuring via phone user interface

Press the Menu soft key when the phone is idle, select

Settings->Advanced Settings (default password: admin)->Network->

WAN Port/VLAN/Webserver Type/802.1x Settings/VPN/LLDP/CDP/NAT

to configure the network.

Press the Menu soft key when the phone is idle, select Settings->Advanced Settings (default password: admin)->Accounts to

configure the account.

Note: For more information on account parameters, refer to Configuring via web user interface above.

Basic Call Features

Placing a Call

Answering a Call

Using the handset:

Using the speakerphone:

Using the headset:

Using the handset:

Using the speakerphone:

Using the headset:

1. With the handset on-hook, press

1. Pick up the handset.

2. Enter the number, and then press the Send soft key.

1. With the headset connected, press to activate the headset mode.

2. Enter the number, and then press the Send soft key.

Pick up the handset.

Press .

Note: During a call, you can alternate between the headset, hands-free speakerphone and handset modes by

Ending a Call

Using the handset:

Using the speakerphone:

Using the headset:

Hang up the handset or press the EndCall soft key.

Press or the EndCall soft key.

Press the EndCall soft key.

Note: You can reject an incoming call by pressing the Reject soft key.

pressing the Headset key, the Speakerphone key or by picking up the handset. Headset mode requires a connected

headset.