User's Manual

Getting Started

2. Connect the supplied Ethernet cable between the Internet port on the phone and

the Internet port in your network or switch/hub device port.

Power over Ethernet

Using a regular Ethernet cable, the SIP-T46G IP phone can be powered from a PoE (IEEE

802.3af) compliant switch or hub.

To connect the PoE:

1. Connect the Ethernet cable between the Internet port on the phone and an

available port on the in-line power switch/hub.

Note

Phone Initialization

After your phone has been powered up, the system boots up and performs the

following steps:

If in-line power is provided, you don’t need to connect the AC adapter. Make sure the

Ethernet cable and switch/hub is PoE compliant.

The phone can also share the network with other network device such as a PC (personal

computer). It is an optional connection.

Important! Do not unplug or remove power to the phone while it is updating firmware

and configurations.